User's Manual

22
Click [Next] with after selecting the check box, which makes the unit discoverable, in which BCD1 can
be discovered and connected from the other Bluetooth device.
Remove BCD1 from the host computer, remember to leave the BCD1 powered on.
Now, plug BCD2 into the serial port of the host computer and power on the unit.
Figure 3-12 ParaniWizard Step 3
Click [Wizard Setting] button to configure the serial settings of BCD2. These settings must be same as
those of the host system, to which BCD2 will be used. Click [Next].
Figure 3-13 ParaniWizard Step 4
Click [Next] after selecting check box. BCD2 will then do a search nearby, and search for Bluetooth