User's Manual

27
Figure 3-21 ParaniUpdater Window
3.11. Terminal Program
A terminal program is typically an application that will enable a PC to communicate directly with a
modem. If you are using Windows 98SE or higher version of Windows, HyperTerminal program is
included as part of the operating system. IW05 provides some extended AT commands for
configuration of the IW05.
This manual will explain the method using HyperTerminal. If you need to install HyperTerminal, click
start>setting>control panel>add/remove programs. For more precise details on HyperTerminal
installations, please refer to Microsoft Windows Help section.
Attach IW05 to serial port of host computer and power on the unit.
Launch HyperTerminal. It can be found in start menu >programs >accessories >communication
>HyperTerminal. Select the Serial port that IW05 will be connected to.
Input the same settings into Serial port configuration window as IW05 settings.
Select the Serial port setting displayed in the Window, please make sure the serial settings in
Hyperterminal are set to the same settings as the IW05’s serial settings.
Figure 3-22 HyperTerminal