User's Manual

14
Example of remote configuration mode.
3.6. Software and Utility
This configuration software and utility for firmware update is included with the product, which also can
be downloaded from http://www.senaindustrial.com
Table 3-3 Configuration Software
Software
Purpose
Operating System
ParaniWIN
Configuration
MS Windows 98SE or Higher
ParaniWizard
Pairing Configuration
MS Windows 98SE or Higher
ParaniMultiWizard
Multi Configuration
MS Windows 98SE or Higher
ParaniUpdater
Firmware Update
MS Windows 98SE or Higher
3.7. ParaniWIN
ParaniWIN is a program that runs on Microsoft Windows for the configuration of IW06. Install
ParaniWIN on your computer. Plug a IW06 into the serial port of the computer and turn on the power.
Run ParaniWIN.
Figure 3-1 Serial Port Setting
Set each option properly and click [Confirm]. If the settings of the IW06 are different from the
ParaniWin, an error message will pop up. If the IW06 is in the status of connection, warning message
will pop up. Then the current connection can be cancelled by [Disconnect] button on the main window.
CONNECT 000195000001
+++
Please Enter Password
AT+PASS=0000
Remote Configuration Enabled
AT+BTINFO?
000195000001,SD1000v2.0.3-095515,MODE0,CONNECT,0,0,HWFC