User's Manual

21
2. Search other local Bluetooth devices by entering the ‘AT+BTINQ?’ command.
3. Check the search list. Enter ‘ATD’ command in the BD_ADDR of any
Bluetooth device for connection. During the connection process, the
STATUS LED will flash green every second.
4. The Parani10 returning a ‘CONNECT’ message and displaying a green
STATUS LED indicates connection.
3.2.3 Making Parani10 do INQUIRY SCAN and PAGE SCAN
To make the Parani10 “Discoverable” (INQUIRY SCAN) and “Connectable”
(PAGE SCAN), these operations must be manually activated.
1. Check the Parani10 status by entering an ‘AT+BTINFO?’ command.
ATD000B53000080
OK
CONNECT
AT+BTINQ?
000B53000080, Parani10-000080,001F00
0004B300E205,AP2002:1 #0,020300
OK
AT+BTINFO?
000B530000A9, Parani10-0000A9,MODE0,STANDBY,0,0
OK