User's Manual

42
Appendix C: Troubleshooting
C.1 ON/OFF of Hardware Flow Control
Parani10 is designed to use CTS/RTS for handshaking. For equipment that is not using
Hardware flow control for serial communications, Parani10’s firmware should be set to turn OFF
hardware flow control (CTS/RTS).
Customers may indicate preferences when ordering or turn off the handshaking by bridging CTS
and RTS (no. 7 and no. 8 lines) using a Gender changer.
Parani10 has automatic detection feature of hardware flow control, but in certain environment
such as PC, this function may not operate correctly.
* Customers may choose the usage of hardware flow control using Para
ni10_Manager
software.
If checked, Parani10 will use hardware flow control. If you do not want to use the function,
please uncheck and press Apply button.