User's Manual

44
C.3 For DCE connection
Parani10 is twisted Rx/Tx-ready for direct DTE connection. For connection to DCE equipment
such as modem etc., customers need to use a gender changer that twisted Tx/Rx, CTS/RTS,
and DTR/DSR for correct operation.
For more information, please contact [e-mail]
C.4 Hardware Reset
For Hardware reset, press the button on the right side of the Parani10 unit with a narrow tool
such as a ballpoint pen.
C.5 How to get Bluetooth CF cards connected to Parani10
If you are using Bluetooth CF cards or USB adaptors from other manufacturers, please use
Parani10_Manager software of latest version, which will be more familiar to consumers.
Parani10_Manager can be downloaded from our website at:
http://www.sena.com/support/downloads
1) In Parani10_Manager, start and go to the Device Setting menu.
2) Select MODE3 to allow any Bluetooth device can discover and connect to this Parani10.
HARD
RESET SWITCH