User's Manual

14
Figure 2-8 Sensitivity Test
The sensitivity test shows Link Quality and RSSI values. The sensitivity is fine, if the Link Quality is
closer to 255 and RSSI is closer to 0. In general, the sensitivity is the best when the distance is 10
meters. You can push the STOP button in order to terminate the sensitivity test. The sensitivity test will
continue until the STOP button is pushed. If you close the ParaniWIN Window without pushing the
STOP button, you must restart Parani-ESD to terminate the test.
Connection(in) icon will show the following window to make Parani-ESD wait to a connection from the
other Bluetooth device. The waiting time in seconds can be controlled. With 0 input for this waiting
time, Parani-ESD keeps waiting for connection until [Cancel] button is clicked.