User's Manual

4. Operation Mode

With Parani-MSP™, users may configure the mode of operation to meet each application.

Total 6 kinds of different modes can be selected. By selecting the appropriate mode, users may

minimize cost and time for developing new solution.

4.1 Server Mode

In Server Mode, Parani-MSP will act as TCP server. If a Bluetooth device is connected to

Parani-MSP, corresponding TCP port for the Bluetooth device will wait for connection for as

Host. The Host may connect to the terminal via this port of Parani-MSP.

Please refer to the drawing below for your better understanding.

<Fig. 4.1> Server Mode

If a Bluetooth device has been registered to Parani-MSP, the Bluetooth device will communicate

with client host via the designated port at Parani-MSP.

If not registered, Parani-MSP will assign arbitrary port number to connect.

Pre-registered Bluetooth devices are distinguishable by the different port numbers at Parani-

MSP.

Bluetooth Terminals