User's Manual

43
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
5.1 Basic Commands
USER <username>
: To enter Log in Name
Ex.:
USER admin
+OK Password required
PASS <password> [new password]
: To enter or change the Password for logging in.
Below Example shows how to change Password from ‘11111’ to ‘1234’
Ex:
PASS 11111
+OK User Authenticated
PASS 11111 1234
+OK
QUIT
: To quit the communication with Parani-MSP
Ex.:
QUIT
+OK
Disconnected
MODE [server|client|vertex|hub|repeater|rs232]
: To check or change the current Operation MODE of Parani-MSP.
If any of Bluetooth devices are connected to Parani-MSP, MODE change
is not allowed. Before changing the MODE, please drop all of Bluetooth
connections first.
Ex.:
MODE
+OK Server Mode
MODE CLIENT
+OK Client Mode
5.2 Commands for Server Mode
PORT [port no.]
: To configure default data port number of Server Mode Parani-MSP.
If a Bluetooth device, which is not pre-registered to Parani-MSP, has