User's Manual

6. AT Command Interface

Parani-MSP supports user friendly AT commands. Make sure this feature enabled in

configuration console in order to use AT commands.

Most of them are compatible with Parani-SD but some have differences in their usage and some

commands are appended for Parani-MSP exclusive use.

Supported AT commands and their differences from AT command of Parani-SD are summarized

as below. Please refer to Parani-SD userguide for more information.

Command Description Example

AT compatible with Parani-SD

ATZ 〃

AT&F 〃

ATD Connectable up to 7 devices concurrently

ATH Device to disconnect can be specified. ath000b53123456<cr>

ATO Device to communicate can be specified.

Without specified device, lately

communicated device will be selected.

ato000b53123456<cr>

CONNECT 000B53123456