User's Manual

20
Figure 2-11 ParaniUpdater Window
2.11. Terminal Program
A terminal program is typically an application that will enable a PC to communicate directly with a
modem. If you are using Windows 98SE or higher version of Windows, HyperTerminal program is
included as part of the operating system. Parani-SD1100 provides some extended AT commands for
configuration of the Parani-SD1100.
This manual will explain the method using HyperTerminal. If you need to install HyperTerminal, click
start>setting>control panel>add/remove programs. For more precise details on HyperTerminal
installations, please refer to Microsoft Windows Help section.
.
Figure 2-12 HyperTerminal
Attach Parani-SD1100 to serial port of host computer and power on the Parani-SD1100. Check Mode
LED. (See 3.2)