User's Manual

1) ]

Run either a Telnet program or a program that supports Telnet functions (i.e. TeraTerm-Pro

or HyperTerminal). The target IP address and the port number must match the Pro Series. If

required, specify the port number as 23. Type the following command in the command line

interface of user’s computer.

telnet 192.168.161.5

Or run a Telnet program with the following parameters:

Figure 2-8 Telnet program set up example (TeraTerm Pro)

2) The user must log into the Pro Series. Type the user name and password. A factory default

settings of the user name and password for CLI login are both root.

3) After entering correct user name and password, user can see the CLI prompts.

2.3. Accessing the Web Browser Management Interface

The Pro Series supports both HTTP and HTTPS (HTTP over SSL) protocols. The Pro Series also

contains its own Web management utility. To access the Pro Series Web management utility, enter

the IP address or resolvable hostname of the Pro Series into the web browser’s URL/Location field.

This will direct the user to the Pro Series login screen. The user must authenticate themselves by

logging into they system with a correct user name and password. The factory default settings are:

삭제됨: