User's Manual

39
Figure 3-86 Locating server configuration
3.8.3. Locating server communication protocol
When the Pro Series sends its IP address information to the locating server, data format will be as
follows:
Description Magic Cookie Data(0) Data(1) … Data(n)
Bytes 4 Variable Variable Variable
Value F1-AA-AA-BC
Data(n) format
Description Data ID Length Data
Bytes 1 1 Variable
Value 1~6 Variable Variable
Data ID
ID Description Length
1 Device name var
2 Model name var
3 Serial number var
4 MAC address 6
5 IP address 4
6 Local ports* 1 or 4 or 8
Note:
Local ports: Each 2 byte data represent current local port setting of the corresponding serial port. Local ports data
length of PSx10W should be 2 bytes. Configured local TCP (or UDP) port numbers for each serial port are filled
in the serial port number order base, (i.e. TCP or UDP port number for serial port 1 first). If serial port is disabled,
the local port number of that serial port is regarded as 0.
Example of the PS110W:
If port number = 7001 (1B59h), Local ports data = 1Bh, 59h
If serial port is disabled, Local port data = 00h, 00h
Example of the PS210W:
Port1 = 7001 (1B59h), Port2 = 7010 (1B62h), Port3 = Disable, Port4 = 7004(1B5Ch)
Local ports data = 1Bh, 59h, 1Bh, 62h, 00h, 00h, 1Bh, 5Ch
서식 있음: 글머리 기호 및
번호 매기기
삭제됨:
삭제됨:
삭제됨:
삭제됨:
삭제됨: