User's Manual

71
Event keywords
The user can assign event keywords so that the Pro Series takes actions such as sending e-mail
notification, sending SNMP trap notification or sending pre-defined command to a serial port if the
keyword is detected at the serial port.
z Event keyword
User can specify any words, which he/she wants to set as a keyword.
z Email notification
User can select enable or disable for the Email notification action on keyword selected.
z SNMP trap notification
User can select enable or disable for the SNMP trap notification action on keyword selected.
z Port command
Pro Series supports direct reaction to a device attached to serial port when pre-defined keyword is
detected. User can specify command or string, which will be sent to a serial port on this menu.
4.2.10. Copy port configuration
User can copy port configuration of one port to another. There are two methods in copying port
configuration. One is “Copy current port configuration to” specified ports and another is “Copy current
port configuration from” specified port.
NOTE:
Port title, TCP port number and UDP port number are not copied by this function.
Figure 4-18 Copy port configuration
서식 있음: 글머리 기호 및
번호 매기기
삭제됨:
삭제됨:
삭제됨:
삭제됨:
삭제됨:
삭제됨:
삭제됨: 그림
삭제됨:
삭제됨: