www.sena.
SMH10 © 1998-2014 Sena Technologies, Inc. All rights reserved. Sena Technologies, Inc. reserves the right to make any changes and improvements to its product without providing prior notice. Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH10R™, SMH5™, SMH5-FM™, SMH3™, SPH10™, EXPAND™, SPH10H™, SPH10H-FM™, SPH10S™, SR10™, SR10i™, SM10™ are trademarks of Sena Technologies, Inc. or its subsidiaries.
SMH10 1. INTRODUCTION................................................................................ 5 English CONTENTS 8. INTERCOM PAIRING ...................................................................... 18 3. INSTALLING THE SMH10 ON YOUR HELMET................................ 7 Pairing with Other SMH10 Headsets for Intercom Conversation... 18 Pairing with Other Sena Headset Models for Intercom Conversation ..................................................................................
SMH10 13. TWO-WAY INTERCOM ................................................................... 27 13.1 13.2 13.3 13.4 Start and End Two-way Intercom ................................................... 27 Intercom and Mobile Phone Call ................................................... 28 Intercom and GPS ........................................................................ 28 Intercom and Two-way Radio ........................................................ 29 14. THREE-WAY CONFERENCE INTERCOM ......
SMH10 Thank you for choosing the Sena SMH10, Bluetooth Stereo Headset and Intercom for Motorcycles. With the SMH10, you can call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other motorcycle riders. The SMH10 is compliant with the Bluetooth 3.
SMH10 &ODPS 8QLW 2. PACKAGE CONTENTS +HDGVHW 0DLQ 8QLW - Speaker-Microphone Clamp Unit - Basic Kit (SMH10-10/SMH10D-10) 6SHDNHUV '& 3RZHU &KDUJLQJ )LUPZDUH 8SJUDGH 3RUW 3KRQH %XWWRQ $QVZHU DQG HQG D PRELOH SKRQH FDOO 5HGLDO ODVW QXPEHU 0LFURSKRQH 03 -DFN &DOO WUDQVIHU EHWZHHQ PRELOH SKRQH DQG KHDGVHW (QWHU LQWR PRELOH SKRQH SDLULQJ PRGH (QWHU LQWR %OXHWRRWK VWHUHR GHYLFH SDULQJ PRGH (QWHU LQWR IDFWRU\ UHVHW PRGH -RJ 'LDO $QVZHU DQG HQG D PRELOH SKRQH FDOO 5HMHFW DQ LQFRPLQJ
SMH10 &LJDUHWWH &KDUJHU PP 6WHUHR $XGLR -DFN &DEOH *OXHG 6XUIDFH 0RXQWLQJ $GDSWHU 0LFURSKRQH 6SRQJHV 3. INSTALLING THE SMH10 ON YOUR HELMET English 86% 3RZHU 'DWD &DEOH To securely install the SMH10 on the helmet, please follow the procedure. 1. Loosen the two screws on the back plate of the speakermicrophone clamp unit using the enclosed Allen Wrench. Insert the back plate of the clamp unit between the internal padding and external shell of the helmet, and tighten the two screws.
SMH10 2. Please adJust the direction of the microphone so that the ln side of the microphone is facing outward; away from your lips. You can easily recogniZe it by touching the ln with your lngers. be mounted so it is facing close to your mouth when you wear the helmet. You can use the enclosed hook and loop fastener and holder for the boom microphone to ensure secure placement.
SMH10 4. If you have any problem to clamp the speaker-microphone unit on the helmet for any reason, you may use the glued surface mounting adapter to attach the speaker-microphone clamp unit on the external surface of the helmet. Ŗ Remove the back plate of the speaker-microphone clamp unit by loosening the two screws with the enclosed Allen Wrench. Ŗ Attach the glued external adapter to the speaker-microphone clamp unit by tightening the two screws instead of the removed back plate.
SMH10 6. To remove the main headset from the speaker-microphone clamp unit, hold the lower part of the speaker-microphone clamp unit with your thumb and gently press down the hook on the upper part of the headset main unit with your index lnger until it clicks out. You may have to do this to charge up or to carry the headset main unit. 4. POWERING ON/OFF AND CHARGING To power on and off the headset, you don’t need to press and hold any button for several seconds.
SMH10 4.4 Low Battery Warning 4.5 Checking the Battery Level You can check the battery level in two different ways when the headset is powering on. 4.5.1 LED Indicator When the headset is powering on, the red LED mashes rapidly indicating the battery level. 5. VOLUME ADJUSTMENT English When the battery is low, the blinking blue LED in stand-by mode turns to red and you will hear mid-tone triple beeps and a voice prompt saying “Low battery”. You can easily adjust the volume by rotating the Jog Dial.
SMH10 6. PAIRING THE SMH10 WITH BLUETOOTH DEVICES Before using the SMH10 Bluetooth headset with any of Bluetooth devices for the lrst time, you need to do the pairing operation. It can be paired with Bluetooth mobile phones, Bluetooth stereo devices such as MP3, or motorcycle specilc Bluetooth GPS, and with other Sena Bluetooth headsets. This pairing operation is only required once for each Bluetooth device.
SMH10 6.3 Bluetooth Stereo Device Pairing 1. If the Bluetooth stereo device is integrated with the mobile phone such as smartphones, you don’t need to pair the SMH10 with it separately. When the SMH10 is paired with the mobile phone, it is also paired as a stereo music device. 2. If you have a stand alone Bluetooth stereo device, follow the paring procedure separately. The procedure is the same as the procedure in “6.1 Mobile Phone Pairing”. Note: English 4. Enter 0000 for the PIN.
SMH10 1. Turn on the headset and press the Jog Dial for 5 seconds until the red LED is rapidly mashing and you hear multiple beeps. 2. Within 2 seconds, tap the Phone Button again, then the LED turns to blue mashing and the beeps turn to high tone double beeps. You will hear a voice prompt saying “Multipoint pairing”. 3. Search for Bluetooth devices on the GPS navigation screen. Select the Sena SMH10 in the list of the devices detected on the GPS. 4. Enter 0000 for the PIN. 5.
SMH10 *36 +)3 Mobile Phone + Pairing $ '3 +)3 60+ Multipoint Pairing 0RELOH 3KRQH GPS Pairing as Mobile Phone Note: You have to use a motorcycle specific GPS which transmits turn-byturn voice instruction to the headset by Bluetooth. Most automotive GPS systems don’t have this feature. The Sena SR10 is a Bluetooth two-way radio adapter for group communication, and uses HFP as do most motorcycle specilc GPS navigation systems.
SMH10 The incoming audio from the two-way radio via SR10 is heard in the background while having an intercom conversation or a mobile phone call. You can listen to music, answer a mobile call, have an intercom conversation and use a two-way radio via SR10 for group communication as shown in the lgure below. A GPS navigation or a radar detector could be connected to the SR10 by wire.
SMH10 If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to selectively use the SMH10 for A2DP stereo music only or for mobile phone handsfree only. This instruction is for advanced users who want to pair the SMH10 to their smartphones only with one selective prolle A2DP stereo for music or HFP for phone call. If you have previously paired a mobile phone to the SMH10, you must clear the previous paring list on both devices; the mobile phone and SMH10.
SMH10 $ 8. INTERCOM PAIRING % 8.1 Pairing with Other SMH10 Headsets for Intercom Conversation The SMH10 can be paired with up to three other headsets for Bluetooth intercom conversation. 1. Turn on the two SMH10 headsets (A and B) that you would like to pair with each other. 2. Press and hold the Jog Dial of the headset A and B for 5 seconds until red LEDs of the both units start to mash rapidly. You will hear a voice prompt saying “Intercom pairing”. 3.
SMH10 Note: For example, after the pairing procedures listed above, headset D is the ſTUV KPVGTEQO HTKGPF of headset A. Headset C is the UGEQPF KPVGTEQO HTKGPF of headset A, and headset B is the VJKTF KPVGTEQO HTKGPF of headset A. 8.2 Pairing with Other Sena Headset Models for Intercom Conversation The SMH10 can be paired with all other Sena headset models such as the SMH5 and the SPH10 for intercom conversation. Please follow the same procedure as above to pair with these headset models.
SMH10 The voice prompt for each menu item is as below (1) Speed dial (5) Sidetone (2) VOX phone (6) 0QKUG EQPVTQN 81: KPVGTEQO (7) Delete all pairings 8QKEG RTQORV 'ZKV EQPſIWTCVKQP 6SHHG GLDO 92; SKRQH ([LW FRQILJXUDWLRQ 'HOHWH DOO SDLULQJV 92; LQWHUFRP 1RLVH FRQWURO 9RLFH SURPSW 6LGHWRQH 9.1 Assigning Speed Dial Voice Prompt 20 1. To assign a phone number as a speed dial, rotate the Jog Dial until you hear a voice prompt saying “Speed dial”. 2.
SMH10 9.2 Enabling/Disabling Voice Activated Phone Answering “VOX phone” Factory Default Enable Enable Tap the Phone Button Disable Tap the Jog Dial If this feature is enabled, you can answer incoming calls by simply saying a word loudly enough. For example, when you hear a series of beeps for an incoming call, you can answer the phone by saying “Hello” or any other word loudly. This is enabled from the factory but you can disable this.
SMH10 - Voice prompts for battery level Indicator - Voice prompts for factory reset When Advanced Noise Control is enabled, the background noise is reduced during an intercom conversation. When it is disabled, the background noise is mixed with your voice during intercom. 9.
SMH10 9.8 E[it Voice ConÀguration Menu ő'ZKV EQPſIWTCVKQPŒ Factory Default N/A Execute Tap the Phone Button To exit voice conlguration menu and get back to stand-by mode, rotate the Jog Dial until you hear a voice prompt saying “Exit FRQ¿JXUDWLRQ´, and tap the Phone Button to conlrm. Tapping the Jog Dial is not available for this setting.
SMH10 11. STEREO MUSIC You can listen to stereo music in two ways with the enclosed stereo audio cable or by Bluetooth wireless stereo. Prolle (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the SMH10 to remotely control music playback. You not only can adjust the volume but also use the functions such as play, pause, next track and previous track. 1. To adjust the volume, rotate the Jog Dial. 11.
SMH10 12. MOBILE PHONE CALL MAKING AND ANSWERING English 3. To track forward or track back, rotate while pressing the Jog Dial clockwise or counter clockwise. 12.1 Mobile Phone Call Making and Answering Note: Bluetooth music is available only when the MP3 jack port remains open. Please make sure the audio cable is unplugged from the clamp unit to play music by Bluetooth. 1. When you have an incoming call, simply tap the Phone Button or the Jog Dial to answer the call. 2.
SMH10 Ŗ Tap the Phone Button in stand-by mode to activate the voice dialing of your mobile phone. For this, the voice dialing feature must be available on the mobile phone. Refer to your mobile phone manual for further instruction. 3. Tap the Phone Button or the Jog Dial to select a voice menu among the followings .CUV PWODGT TGFKCN (2) Speed dial 1 12.2 Speed Dialing You can quickly make a phone call by using the voice speed dial menu. 1.
SMH10 End Tap Phone Button or Tap Jog Dial or Say “Hello” Tap Phone Button or Press Jog Dial for 2” 13. TWO-WAY INTERCOM English Answer Reject Press Jog Dial for 2” 13.1 Start and End Two-way Intercom Transfer Press Phone Button for 2” 1. You can start an intercom conversation with one of any intercom friends by tapping the Jog Dial single tapping to intercom with the lrst intercom friend, double tapping with the second intercom friend, and triple tapping with the third intercom friend.
SMH10 2. To terminate an intercom conversation, single tap the Jog Dial. Any intercom connection with any intercom friend will be terminated by a single tapping. A double or triple tapping will do nothing in this case. Terminate End Two-way Intercom Conversation Start intercom End intercom 1st intercom friend 2nd intercom friend 3rd intercom friend Single tap Double tap Triple tap Single tap a. To answer the phone call and stop the intercom conversation, tap the Jog Dial or the Phone Button.
SMH10 English *36 6PDUW 3KRQH 9RLFH Multipoint ,QVWUXFWLRQ Pairing +)3 Mobile Phone Pairing 6PDUW 3KRQH +)3 + Mobile Phone Pairing $ '3 ,QWHUFRP 60+ Intercom Pairing 7ZR ZD\ 5DGLR :LUHG &RQQHFWLRQ $XGLR IURP 7ZR ZD\ 5DGLR Sena SR10 ,QWHUFRP )ULHQG 60+ Multipoint Pairing Intercom and GPS voice instruction 13.4 Intercom and Two-way Radio As described in 6.
SMH10 You (A) can have a three-way conference intercom with two other SMH10 friends (B & C) by establishing two intercom connections at the same time. While a three-way conference intercom is in progress, mobile phone connection of all three participants would be temporarily disconnected, but as soon as the conference intercom terminates or one of the participants leaves the intercom, all mobile phones would be automatically reconnected.
SMH10 $ )LUVW )ULHQG % 6HFRQG )ULHQG & 4. Now you (A) and two SMH10 intercom friends (B & C) are having a three-way conference intercom. $ 14.2 End Three-way Intercom When you are a member of an active three-way conference intercom, you can completely terminate the conference intercom or just disconnect an intercom connection with one of your active intercom friends. 1. Press the Jog Dial for 1 second until you hear a beep to terminate three-way conference intercom completely.
SMH10 15. FOUR WAY CONFERENCE INTERCOM 15.1 Start Four-way Intercom You can have four-way conference intercom with three other SMH10 users by adding one more intercom participant to the three-way intercom. While you are having three-way intercom as speciled in section 14.1, a new participant (D), who is an intercom friend of your intercom friend (C), may join the conference intercom by making an intercom call to your intercom friend (C).
SMH10 You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation. When you terminate music sharing, you can go back to the intercom conversation. To start or terminate sharing music, press and hold the Jog Dial for 1 second during an intercom conversation until you hear a double beep and you and your intercom friend will listen to or terminate sharing music.
SMH10 cannot use multipoint connection devices such as GPS, while a non-Sena headset is turned on. 4. Even though you disconnect the non-Sena headset as a Universal Intercom, it will not automatically restore the multipoint connection. To restore the multipoint connection, you should turn off the non-Sena headset lrst, then try to connect to multipoint device manually from the device screen or simply reboot the device so that it automatically connects to the Sena headset. 17.
SMH10 3D LUL QJ $ QJ LUL 3D $ 3. The Other SMH10 (C) may join the intercom by making an intercom call to you (A). % % & & 2. Start an intercom conversation with non-Sena Bluetooth headset (B) in your intercom group. For example, you (A) may start an intercom conversation with non-Sena Bluetooth headset (B). The non-Sena Bluetooth headset (B) may also start an intercom call with you (A). 4.
SMH10 17.4 Four-way Universal Intercom You may make a four-way Universal Intercom connection with a couple of different conlgurations, 1) three SMH10s and one non-Sena Bluetooth headset or 2) two SMH10s and two non-Sena Bluetooth headsets.
SMH10 $ & ' % You may disconnect a four-way Universal Intercom using the same way as you do in a normal four-way intercom. Please refer to section, 15.2 “End Four-way Intercom”. 17.4.2 Four-way Universal Intercom Case 2 Three SMH10 headsets (A, C and D) and one non-Sena Bluetooth headset (B). The procedure is the same as the case 1 described in section 17.4.1. 18.
SMH10 19. INTERCOM FAILURE When you try to start an intercom conversation with an intercom friend who is already having a conference intercom with other riders or a mobile phone call, you will hear a low tone double beep signifying an intercom busy signal. In this case, you have to try again later. 20. INTERCOM RECONNECTION If your intercom friend goes out of range while having an intercom conversation, you may hear static noise and eventually the intercom will be disconnected.
SMH10 When the SMH10 is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button at the back of the headset main unit. Insert a paper clip into the reset pinhole and press the reset button for a second with light pressure. The SMH10 will be switched off, and you have to turn the system back on and try again. However, this will not restore the headset to factory default settings. 23. FIRMWARE UPGRADE English 22.
SMH10 24.
SMH10 Case 3 Case 2 English *36 0RELOH 3KRQH 3DLULQJ %OXHWRRWK *36 %OXHWRRWK *36 0RELOH 3KRQH 0RELOH 3KRQH 3DLULQJ 0RELOH 3KRQH 3DLULQJ ,QWHUFRP 3DLULQJ Bluetooth Pairing Procedure 1 GPS - Mobile Phone Pairing 2 Mobile Phone Pairing 3 Intercom Pairing Bluetooth GPS* zumo 550/660/665, TomTom Rider Usage Ŗ GPS zumo 660/665 GPS instruction, phone call, listening to music zumo 550, TomTom Rider GPS instruction, phone call Ŗ Intercom ,QWHUFRP 3DLULQJ 0XOWLSRLQW 3DLULQJ 0RELOH 3KRQH Blueto
SMH10 Case 4 Case 5 0RELOH 3KRQH 0RELOH 3KRQH 0RELOH 3KRQH 3DLULQJ 0RELOH 3KRQH 3DLULQJ *36 ,QWHUFRP 3DLULQJ 0RELOH 3KRQH 3DLULQJ %OXHWRRWK *36 ,QWHUFRP 3DLULQJ 0RELOH 3KRQH 3DLULQJ 0RWRUF\FOH %OXHWRRWK $XGLR 6\VWHP 0XVLF Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Intercom Pairing Bluetooth GPS* Yupiteru, smartphone apps Usage Ŗ Mobile Phone phone call Ŗ GPS GPS instruction Ŗ Intercom 42 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone
SMH10 Case 6 0RELOH 3KRQH English Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Multipoint Pairing 4 Intercom Pairing Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider 0RELOH 3KRQH 3DLULQJ Motorcycle Bluetooth Audio System* BMW R1200RT, K1600GT, K1600GTL ,QWHUFRP 3DLULQJ 0RELOH 3KRQH 0RWRUF\FOH %OXHWRRWK 3DLULQJ $XGLR 6\VWHP 0XVLF Usage Ŗ Mobile Phone phone call Ŗ Motorcycle Bluetooth Audio System listening to music Ŗ GPS GPS instruction Ŗ Intercom 0XOWLSRL
SMH10 Case 7 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Multipoint Pairing 3 Intercom Pairing 0RELOH 3KRQH *36 0RELOH 3KRQH 3DLULQJ SR10 0XOWLSRLQW 3DLULQJ 7ZR ZD\ 5DGLR ,QWHUFRP 3DLULQJ 5DGDU 'HWHFWRU 44 Usage Ŗ Mobile Phone phone call Ŗ SR10 two-way radio, GPS guidance, Radar detecting signal Ŗ Intercom
SMH10 Case 8 0RELOH 3KRQH 3DLULQJ 0RELOH 3KRQH 3DLULQJ 03 3OD\HU ,QWHUFRP 3DLULQJ English *36 0RELOH 3KRQH %OXHWRRWK *36 3DLULQJ 0RELOH 3KRQH Bluetooth Pairing Procedure 1 GPS - Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing 4 Intercom Pairing Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider Usage Ŗ GPS phone call, GPS instruction Ŗ MP3 Player listening to music Ŗ Intercom 45
SMH10 Case 9 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing 4 Multipoint Pairing 5 Intercom Pairing 0RELOH 3KRQH *36 0RELOH 3KRQH 3DLULQJ SM10 SR10 0XOWLSRLQW 3DLULQJ 0RELOH 3KRQH 3DLULQJ 7ZR ZD\ 5DGLR ,QWHUFRP 3DLULQJ 0RELOH 3KRQH 3DLULQJ 5DGDU 'HWHFWRU 46 Usage Ŗ Mobile Phone phone call Ŗ SR10 two-way radio, GPS instruction, Radar detecting signal Ŗ SM10 listening to music/sharing Ŗ Intercom
SMH10 Case 10 0RELOH 3KRQH 0RELOH 3KRQH 3DLULQJ 0XOWLSRLQW 3DLULQJ ,QWHUFRP 3DLULQJ 0RELOH 3KRQH 3DLULQJ English Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing 4 Multipoint Pairing 5 Intercom Pairing Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider %OXHWRRWK *36 Usage Ŗ Mobile Phone phone call Ŗ GPS GPS instruction Ŗ SM10 listening to music/sharing Ŗ Intercom 0RELOH 3KRQH 3DLULQJ SM10 25 0RWRUF\FOH $XGLR 6\VWHP 03 3OD\HU 47
SMH10 25.
SMH10 FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules.
SMH10 CE Declaration of Conformity This product is CE marked according to the provisions of the R&TTE Directive (99/5/EC). Hereby, Sena declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information, please consult www.sena.com. Please note that this product uses radio frequency bands not harmonized within EU.
SMH10 Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and/or damage to property. Product Storage and Management s Keep the product free of dust. It may damage mechanical and electronic parts of the product. s Do not store the product in high temperatures as this may reduce the life span of electronic devices, damage the battery, and/or melt plastic parts of the product. s Do not store the product in cold temperatures.
SMH10 s Before riding, fasten the product to the helmet, and double-check that it is fastened. Separation of the product while riding may cause damage to the product or accidents. s If the product is damaged, stop using it immediately. It may cause damage, explosion, or fire. Battery This product has an irreplaceable rechargeable battery inside. Therefore, when using the product, make sure to adhere to the following s Never separate the battery from the product as this may damage the product.
SMH10 Limited Warranty Limited Warranty Sena Technologies, Inc. (“Sena”) guarantees the product quality based on the technical specilcation stated in the product manual, and data regarding product warranty. Here, product warranty extends to the product only. Sena will not be liable for any loss, damage of human life, or loss of property which may result from using the product beyond defective parts or maws that occur due to problems in manufacture.
SMH10 3. You are responsible for ensuring that your medical condition permits usage of the product and that you are in suflcient physical condition for using any device which can be used with it. In addition, you must ensure that the product does not limit your abilities and that you are able to use it safely. 4. You must be an adult who can take responsibilities for using the product. 5.
SMH10 Warranty Exclusions Use of this product may violate local or national laws. In addition, be aware once again that correct and safe use of the product is entirely your responsibility.
SMH10 Liabilities Disclaimer In addition to damages which may occur due to the use of the product, Sena will not be liable for damages of the product which occur due to the following events. In the event the product is misused or used for purposes other than its intended purposes. In the event the product is damaged because the user does not follow the content of the product manual. In the event the product is damaged because it has been left unattended or has undergone any other accident.
3.4.3 www.sena.com User's Guide for Firmware v5.1.
