User's Manual

SMH10

The voice prompt for each menu item is as below

(1) Speed dial (5) Sidetone

(2) VOX phone (6) 0QKUGEQPVTQN

81:KPVGTEQO (7) Delete all pairings

8QKEGRTQORV 'ZKVEQPſIWTCVKQP

([LWFRQILJXUDWLRQ

'HOHWHDOOSDLULQJV

1RLVHFRQWURO

92;SKRQH

92;LQWHUFRP

9RLFHSURPSW

6SHHGGLDO

6LGHWRQH

9.1 Assigning Speed Dial

Voice Prompt

“Speed dial”

Factory Default N/A

Execute Tap the Phone Button

1. To assign a phone number as a speed dial, rotate the Jog Dial until

you hear a voice prompt saying “Speed dial”.

2. Tap the Phone Button, and you will hear a voice prompt saying

“Speed dial one” and “Phone connected”.

3. Rotate the Jog Dial to select one of three speed dial numbers and

you hear a voice prompt saying “Speed dial (#)”.

4. Call a phone number you want to assign and you will hear a

voice prompt saying “Save speed dial (#)”. The phone number is

automatically assigned to the selected speed dial number. Then

the phone call will hang up before being connected.

5. To exit the menu, rotate the Jog Dial clockwise or counter clockwise

until you hear a voice prompt saying “Cancel”, and tap the Phone

Button to conlrm. You will then hear a voice prompt saying

“Cancel”. If any button is not pressed within 1 minute, the SMH10

will exit the conlguration menu and go back to stand-by mode.

Note:

1. After assigning a phone number to one of three speed dials, you can

continually assign another phone number to the rest of two speed dials.

2. You can assign phone numbers to speed dials in your PC. Please visit the

Sena Bluetooth web site at www.sena.com for more information.