User's Manual

SMH10

2. Please adJust the direction of the microphone so that the ln side

of the microphone is facing outward; away from your lips. You can

easily recogniZe it by touching the ln with your lngers.

fin

The microphone cap helps you to cut down incoming microphone

wind noise by protecting the microphone from the wind and provide

clearer voice audio sound. Put the microphone cap on the side of

the microphone that has the ln on it.

When installing the boom microphone included in the “Universal

Microphone Kit”, place the hook and loop fastener end of the

boom microphone between the internal helmet cheek pad and

the internal wall of the helmet shell. The boom microphone should

be mounted so it is facing close to your mouth when you wear

the helmet. You can use the enclosed hook and loop fastener and

holder for the boom microphone to ensure secure placement.

In the case of the wired microphone also included in the “Universal

Microphone Kit”, attach the enclosed hook and loop fastener

for wired microphone to the inside of the chin guard for full-face

helmets. Place the wired microphone on the hook and loop fastener

and connect it to the connector of the clamp unit.