SPH10 Bluetooth® Stereo Headset and Intercom for Outdoor Sports and Activities SENA www.senabluetooth.
| SPH10 CONTENTS INTRODUCTION ...................................................................................................................... 4 PACKAGE CONTENTS............................................................................................................ 5 WEARING THE SPH10 ............................................................................................................ 7 Microphone Installation ................................................................................
| SPH10 Bluetooth License ............................................................................................................ 29 WAIVER AND GENERAL RELEASE...................................................................................... 30 Two-Year Limited Warranty ............................................................................................. 32 Limitation of Liability ........................................................................................................
| SPH10 INTRODUCTION Thank you for choosing the SENA SPH10, Bluetooth Stereo Headset and Intercom for Outdoor Sports and Activities. With the SPH10, you can call hands-free on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other motorcycle riders. The SPH10 is compliant with the Bluetooth Specification v2.
| SPH10 PACKAGE CONTENTS Headset Main Unit Status LED Phone Button Making and Answering a mobile phone call Entering into Mobile Phone Pairing Mode Entering into Bluetooth Audio Device Pairing Mode (MP3, GPS navigation) Entering into Voice Activated Phone Answering Setting Mode Jog Dial Start and End an Intercom Conversation Volume adjustment by rotating Play and Pause Bluetooth MP3 player Track-forward and Track-back by rotating while pressing the button Entering into Intercom Pairing
| SPH10 WEARING THE SPH10 Microphone Installation Two microphones are included in the package: a long-boom microphone for high noise environment and a short microphone for indoor use. Plug the microphone into the microphone port and turn clockwise until tightened. Adjust the direction of the long-boom microphone so that the triangular mark on the microphone is pointing towards your mouth.
| SPH10 POWERING ON/OFF AND CHARGING To power on and off the headset, you don’t need to press and hold any button for several seconds. Just short press the Jog Dial and the Phone Button simultaneously, and you will get quick on-and-off convenience. Powering On Press the Jog Dial and the Phone Button at the same time for about 1 second to power on. The blue LED turns on and you will hear ascending beeps.
| SPH10 PAIRING THE SPH10 WITH BLUETOOTH DEVICES Before using the SPH10 Bluetooth headset with any of Bluetooth devices for the first time, you need to do the pairing operation. It can be paired with Bluetooth mobile phones, Bluetooth audio devices such as MP3 or GPS, and with other SPH10 Bluetooth headsets.
| SPH10 PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to selectively use the SPH10 for A2DP stereo music only or for mobile phone hands-free only. This instruction is for advanced users who want to pair the SPH10 to their smartphones only with one selective profile: A2DP Stereo for music or HFP for phone call. A2DP Stereo Music Only 1.
| SPH10 PAIRING WITH OTHER SPH10 HEADSETS FOR INTERCOM CONVERSATION The SPH10 can be paired with up to three other headsets for Bluetooth Intercom conversation. 1. Turn on the two headsets (A and B) that you would like to pair with each other. 2. Press and hold the Jog Dial of the headset A for 5 seconds until red LED starts to flash rapidly. 3. Press and hold the Jog Dial of the headset B for 5 seconds until red LED starts to flash rapidly. 4.
| SPH10 5. You can make other pairings between the headset A and C, and between the headset A and D by following the same procedure as above. (Headset A is paired with Headset C and with Headset D) Pairing A & C 6. Pairing A & D If a headset has multiple paired headsets for intercom conversations, the lastly paired headset is set as First Intercom Friend.
| SPH10 USING THE SPH10 Volume Adjustment You can easily adjust the volume by rotating the Jog Dial. You will hear a beep when the volume reaches maximum or minimum level. The volume is set and maintained separately at different levels for each function even when you turn off and on the headset. For example, once you set the mobile phone conversation volume, it is not changed even if you raise the volume when you hear Bluetooth MP3 music.
| SPH10 Enabling/Disabling Voice Activated Phone Answering (Factory Default: Disabled) If this feature is enabled, you can answer incoming calls by simply saying a word loudly enough. For example, when you hear a series of beeps by an incoming call, you can answer the phone by saying “Hello” or any other word loudly. The factory default setting is disabled. You can enable or disable this mode. If this mode is disabled, the only way to answer an incoming call is to tap the Phone Button. 1.
| SPH10 2. To terminate an intercom conversation, single tap the Jog Dial. Any intercom connection with any Intercom Friend will be terminated by a single tapping. A double or triple tapping will do nothing in this case. 3-Way Conference Intercom You (A) could have a 3-way conference intercom with 2 other SMH10 friends (B & C) by establishing two intercom connections at the same time.
| SPH10 Thanks to the 3-way conference intercom feature, you could make and receive another intercom call even while you are already having an intercom conversation. All three participants (A, B & C) could receive Bluetooth mobile phone calls even while the conference intercom is in progress. 4-Way Conference Intercom A 4-way conference intercom conversation can be established by adding one more participant to a 3-way conference intercom. 1.
| SPH10 Multi-User Conference Intercom A group of more than four riders can have multi-user conference intercom by a similar method of having two intercom connections at the same time. For example, in the above case of 4way conference intercom, B & D could have one more intercom connection each because both are at the open end of the intercom chain. It means that both B & D are having only one intercom connection at the moment.
| SPH10 manually by tapping the Jog Dial again. If this feature is disabled, the only way to initiate and terminate an intercom conversation is to tap the Jog Dial. 1. Press and hold the Jog Dial for 8 seconds until the red LED turns on solidly. When you do this, after first 5 seconds you press the Jog Dial, you will see the headset enters into the Intercom Pairing sequence, but you have to keep pressing the Jog Dial for another 3 seconds until the LED turns to solid red. 2.
| SPH10 Tip: The Jog Dial is for any kind of Intercom related function, and the Phone Button is for any functions of mobile phone. With this reason, as far as intercom function is concerned, the Jog Dial is used for a positive manner of action such as enabling, and the Phone Button is for a negative manner of action such as disabling. Vice versa for the mobile phone functions.
| SPH10 2. By Bluetooth Wireless Stereo The Bluetooth audio device must be paired with the SPH10 by following the Bluetooth Audio Device Pairing instructions described in the previous chapter. The SPH10 supports the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the SPH10 to remotely control music playback. So, you may not only adjust the volume but also use the functions such as play, pause, next track and previous track.
| SPH10 Function Priority The SPH10 operates in the following order of priority: (highest) Mobile phone, Intercom, Stereo music by audio cable, and (lowest) Bluetooth stereo music A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by intercom call, and intercom conversation is interrupted by incoming mobile phone call. Tip: Stereo Music by Bluetooth or 3.
| SPH10 into the reset pin-hole and press the reset button for a second with light pressure. The SPH10 will be switched off and you have to turn on and try to use again. However, this will not restore the headset to factory default settings.
| SPH10 FIRMWARE UPGRADE The SMH10 supports firmware upgrade function. Please visit SENA Bluetooth web site www.SenaBluetooth.com/supports/download to check the latest software downloads.
| SPH10 PERATION QUICK REFERENCE Button Description Duration LED Beep Phone Button + Jog Dial Power-on 1 sec Solid blue Ascending beeps Power-off Tapping Solid red Descending beeps Mobile phone pairing MP3, GPS pairing Phone Button Voice activated phone answering setting High-tone multiple beeps High-tone multiple beeps Mid-tone single beep Factory reset 12 sec Solid red High-tone double beeps Jog Dial within 5 sec to confirm reset Make & answer phone call Tapping - Intercom pairi
| SPH10 BATTERY INFORMATION The SPH10 has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge the battery only with SENA approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard. Always try to keep the battery between 15℃ and 25℃ (59℉ and 77℉).
| SPH10 MAINTENANCE AND CARE The SHM10 should be treated with care and the following suggestions will help you protect your warranty coverage. 1. Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. 2. Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and wrap or melt certain plastics. 3. Do not store the device in cold areas.
| SPH10 DISPOSAL The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available.
| SPH10 CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: - This device may not cause harmful interference, and - This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
| SPH10 WAIVER AND GENERAL RELEASE By using the SPH10 you will waive substantial legal rights including the right to sue. Please read the following carefully before using the device. If you do not accept all terms of this agreement, you should immediately return the product for a full refund. By using the headset you agree to be bound to this agreement and forfeit the right to sue.
| SPH10 damages to or in respect to any person or property however caused, WHETHER ARISING FROM THE NEGLIGENCE OR OTHERWISE, and which may hereafter accrue to you on some future date as a result of said use, to the fullest extent permitted by law. 2. You fully understand and assume the risks in using the Device, including risk of negligent acts or omissions by others. 3.
| SPH10 Two-Year Limited Warranty Sena Technologies, Inc. (“SENA”) warrants that this product (“Product”) shall conform to and perform in accordance with published technical specifications and the accompanying written materials, and shall be free of defects in materials and workmanship, for a period of two (2) year from the date of purchase by the first consumer purchaser of the Product.
| SPH10 Return for Full Refund IF YOU ARE UNWILLING TO ACCEPT AND AGREE TO THE ABOVE CONDITIONS, YOU MAY RETURN THIS DEVICE TO SENA FOR A FULL REFUND, PROVIDED THAT YOU DO SO NO LATER THAN 14 BUSINESS DAYS FOLLOWING THE PURCHASE OF THE DEVICE AND SUBJECT TO THE WRAPPING BEING INTACT. WHEN DOING SO, PLEASE REFER TO THIS SECTION.
| SPH10 WARNING SENA informs that using this device in public traffic may not be authorized by the law. Please check your local law and use this device only out of public traffic such as private properties or closed circuits. If the simultaneous use of both ear speakers while riding a motorcycle is prohibited by your local law, please use only a single ear speaker while riding. SENA denies any liability should you choose not to respect this warning.
| SPH10 SENA www.senabluetooth.com 35 v2.0.
