User's Manual

| SPH10
10
PAIRING WITH SELECTIVE PROFILE: A2DP STEREO
OR HANDSFREE
If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to
selectively use the SPH10 for A2DP stereo music only or for mobile phone hands-free only.
This instruction is for advanced users who want to pair the SPH10 to their smartphones only
with one selective profile: A2DP Stereo for music or HFP for phone call.
A2DP Stereo Music Only
1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red
and blue alternately and you hear multiple beeps.
2. Within 2 seconds, tap the Jog Dial again, then the LED turns to red flashing and the
beeps turn to double mid-tone beeps.
3. Search for Bluetooth devices on your smartphone. The headset will be listed on your
mobile phone as SPH10.
4. Enter 0000 for the PIN. Some smartphones may not ask for PIN.
HFP for Phone Call Only
1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red
and blue alternately and you hear multiple beeps.
2. Within 2 seconds, tap the Phone Button again, then the LED turns to blue flashing and
the beeps turn to multiple mid-tone beeps.
3. Search for Bluetooth devices on your smartphone. The headset will be listed on your
mobile phone as SPH10.
4. Enter 0000 for the PIN. Some smartphones may not ask for PIN.