User's Manual

| SPH10

USING THE SPH10

Volume Adjustment

You can easily adjust the volume by rotating the Jog Dial. You will hear a beep when the

volume reaches maximum or minimum level. The volume is set and maintained separately at

different levels for each function even when you turn off and on the headset. For example,

once you set the mobile phone conversation volume, it is not changed even if you raise the

volume when you hear Bluetooth MP3 music. So you can always maintain preferred optimum

volume level for each function.

Mobile Phone Call Making and Answering

1. When you have an incoming call, simply tap the Phone Button to answer the call.

2. You can also answer the incoming call by loudly speaking any word of your choice if the

Voice Activated Phone Answering Function of the SPH10 is enabled. (Refer to the

next section for detail)

3. To reject a call, tap the Jog Dial while the phone is ringing.

4. To transfer a call between the mobile phone and the headset, tap the Jog Dial during the

phone conversation. You will hear a short/long beep when the call is transferred to the

phone/headset.

5. There are several ways to make a phone call:

- Enter number on your mobile phone keypad and tap the Phone Button. The call is

automatically transferred to the headset.

- Tap the Phone Button in stand-by mode to activate the voice dialing of your mobile

phone. For this, the voice dialing feature must be available on the mobile phone. Refer to

your mobile phone manual for further instructions.

- To redial the last number, double tap the Phone Button in stand-by mode.