User's Manual

| SPH10

Enabling/Disabling Voice Activated Phone Answering (Factory Default:

Disabled)

If this feature is enabled, you can answer incoming calls by simply saying a word loudly

enough. For example, when you hear a series of beeps by an incoming call, you can answer

the phone by saying “Hello” or any other word loudly. The factory default setting is disabled.

You can enable or disable this mode. If this mode is disabled, the only way to answer an

incoming call is to tap the Phone Button.

1. Press and hold the Phone Button for 8 seconds until the red LED is rapidly flashing.

When you do this, after first 5 seconds you press the button, you will see the headset

enters into the Mobile Phone Pairing sequence, but you have to keep pressing the

button for another 3 seconds until the red LED flashes rapidly.

2. To enable, tap the Phone Button, then the LED shows solid blue for 2 seconds and you

will hear double beeps.

3. To disable, tap the Jog Dial, then the LED shows solid red for 2 seconds and you will

hear a single beep.

Intercom Conversation

1. You can start an intercom conversation with any of Intercom Friends by tapping the Jog

Dial: single tapping to intercom with the First Intercom Friend, double tapping with the

Second Intercom Friend, and triple tapping with the Third Intercom Friend.