User's Manual

| SPH10
17
Multi-User Conference Intercom
A group of more than four riders can have multi-user conference intercom by a similar method
of having two intercom connections at the same time. For example, in the above case of 4-
way conference intercom, B & D could have one more intercom connection each because
both are at the open end of the intercom chain. It means that both B & D are having only one
intercom connection at the moment. If B or D has one more intercom connection with
someone else, they will form a 5-way conference intercom, and if both have one more each,
they will have 6-way conference intercom all together.
Terminating Conference Intercom
When you are a member of an active conference intercom, you can completely get out of the
conference intercom or just terminate an intercom connection with one of your active Intercom
Friends.
1. With a 1 second press-and-hold of the Jog Dial, you can get out of the conference
intercom completely. It terminates both of the two active intercom connections: one with(B)
and one with (C).
By single or double tapping the Jog Dial, you can terminate the intercom connection with one
of the two connected Intercom Friends accordingly. For example, by single tapping the Jog
Dial, you can just terminate the intercom connection with your First Intercom Friend, (B).
However, you still have the intercom connection with your Second Intercom Friend, (C).
Enabling/Disabling Voice Activated Intercom (Factory Default: Disabled)
If this feature is enabled, you can initiate an intercom conversation with the last connected
Intercom Friend by speaking any word loudly enough. The most effortless way to trigger
intercom VOX is to blow into the microphone as if blowing dust off the microphone. If you start
an intercom conversation by VOX, the intercom terminates automatically when you and your
Intercom Friend remain silent for 20 seconds. However, if you manually start an intercom
conversation by tapping the Jog Dial, you have to terminate the intercom conversation