User's Manual

| SPH10
18
manually by tapping the Jog Dial again.
If this feature is disabled, the only way to initiate and terminate an intercom conversation is to
tap the Jog Dial.
1. Press and hold the Jog Dial for 8 seconds until the red LED turns on solidly. When you
do this, after first 5 seconds you press the Jog Dial, you will see the headset enters into
the Intercom Pairing sequence, but you have to keep pressing the Jog Dial for another 3
seconds until the LED turns to solid red.
2. To enable, tap the Jog Dial, then the blue LED flashes for 2 seconds and you will hear
double beeps.
3. To disable, tap the Phone button, then the red LED flashes for 2 seconds and you will
hear a single beep.