User's Manual

| SMH5
13
Function Priority
The SMH5 operates in the following order of priority:
(highest) Mobile phone,
Intercom,
Stereo music by audio cable, and
(lowest) Bluetooth stereo music
A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by
intercom call, and intercom conversation is interrupted by incoming mobile phone call.
Tip: Stereo Music by Bluetooth or 3.5mm audio cable
Bluetooth music is available only when the MP3 jack port remains open. Please make sure the audio cable is unplugged
from the clamp unit to play music by Bluetooth
Tip: Stereo Music by Bluetooth or 3.5mm audio cable
Reset to Factory Default Settings
1. To restore the SMH5 to factory default settings, press and hold the Phone Button for 12 seconds until the LED shows
solid red and you hear double beeps.
6. Then within 5 seconds, press the Jog Dial to confirm reset. The headset will be restored to factory setting and
switched off automatically.
7. If you don’t press the Jog Dial within 5 seconds, the reset attempt is canceled and the headset returns to stand-by
mode.
FM Radio
Operation Button Duration Description Beep
Voice
Prompt
Basic
FM On Phone Button 2"
until double beep,
when released mid-tone double FM On
FM Off Phone Button 2"
until double beep,
while pressed mid-tone double FM Off
Volume Up Jog Dial rotation
Volume Down Jog Dial rotation
RDS Set Jog Dial 15"
until double beep,
while pressed high-tone double RDS
RDS On/Off Phone/Jog tab
enable=phone,
disable=jog
enable=mid-tone double
disable=mid-tone single
enabled/dis
abled
Tune
Seek Up Jog Dial push+rotation high-tone triple
Seek Down Jog Dial push+rotation high-tone triple
Select Preset Phone Button tab 1~6 rotation mid-tone single
Preset
Number(ex.
One)
Save Preset Jog Dial 3" until double beep, high-tone double Preset