User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. PACKAGE CONTENTS
- 3. INSTALLING THE SMH10R ON YOUR HELMET
- 4. POWERING ON/OFF AND CHARGING
- 5. Volume Adjustment
- 6. SMH10R CONFIGURATION SETTING
- 6.1 Mobile Phone Pairing
- 6.2 Multipoint Pairing
- 6.3 Phone Selective Pairing
- 6.4 Media Selective Pairing
- 6.5 Enabling/Disabling Voice Activated Phone Answering
- 6.6 Enabling/Disabling Voice Activated Intercom
- 6.7 Setting VOX Sensitivity
- 6.8 Enabling/Disabling Voice Prompts
- 6.9 Delete All Bluetooth Pairing Information
- 6.10 Reset to Factory Default Setting
- 6.11 Exit Voice Configuration Menu
- 7. PAIRING THE SMH10R WITH BLUETOOTH DEVICES
- 8. PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE
- 9. Intercom Pairing
- 10. FUNCTION PRIORITY
- 11. STEREO MUSIC
- 12. MOBILE PHONE CALL MAKING AND ANSWERING
- 13. TWO-WAY INTERCOM
- 14. THREE-WAY CONFERENCE INTERCOM
- 15. FOUR-WAY CONFERENCE INTERCOM
- 16. THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
- 17. INTERCOM FAILURE
- 18. INTERCOM RECONNECTION
- 19. FAULT RESET
- 20. FIRMWARE UPGRADE
| SMH10R
17
9.2 Pairing with Other Sena Headset Models for Intercom Conversation
The SMH10R can be paired with all other Sena headset models such as the SMH10, the SPH10 and the SMH5 for
intercom conversation. Please follow the same procedure as above to pair with these headset models.
Note:
The SMH5 cannot participate in three-way or four-way conference intercom with the SMH10R or the SMH10. The SMH5
has a limited capability of having two-way intercom with each other or with other Sena headsets such as the SMH10R
and the SMH10.
10. FUNCTION PRIORITY
The SMH10R operates in the following order of priority:
(Highest) Mobile phone,
Intercom,
Stereo music by audio cable, and
(Lowest) Bluetooth stereo music
A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by
intercom call, and intercom conversation is interrupted by incoming mobile phone call.
11. STEREO MUSIC
11.1 By Bluetooth Wireless Stereo
The Bluetooth audio device must be paired with the SMH10R by following the “Bluetooth Stereo Device Pairing”
procedures described in the 6.2 chapter. The SMH10R supports the Audio/Video Remote Control Profile (AVRCP), so if
your Bluetooth audio device also supports the AVRCP, you can use the SMH10R to remotely control music playback. You
not only can adjust the volume but also use the functions such as play, pause, next track and previous track.
1. To adjust the volume, press the (+) Button or the (-) Button.
2. To play or pause music, press and hold the Center Button for 1 second until you hear a mid-tone double beep.
3. To track forward or track back, press and hold the (+) Button or (-) Button for 2 seconds until you hear a single beep.
12. MOBILE PHONE CALL MAKING AND ANSWERING
1 When you have an incoming call, simply press the Center Button to answer the call.
2 You can also answer the incoming call by loudly speaking any word of your choice if Voice Activated Phone
Answering is enabled, unless you are connected to intercom.
3 To end a call, press the Center Button for 2 seconds until you hear a mid-tone single beep, or wait for the called
person to end the call.
4 To reject a call, press the Center Button for 2 seconds until you hear a beep while the phone is ringing.
5 To transfer incoming call, transfer should be done from the mobile phone.
6 There are several ways to make a phone call:










