User's Manual

| EXPAND
12
Note:
The SMH5 cannot participate in three-way or four-way conference intercom with the EXPAND. The SMH5 has a limited
capability of having two-way intercom with each other or with other Sena headset models.
7. FUNCTION PRIORITY
The EXPAND operates in the following order of priority:
(highest) Mobile phone,
Intercom,
Stereo music by audio cable,
(lowest) Bluetooth stereo music
A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by
intercom call, and intercom conversation is interrupted by incoming mobile phone call.
8. STEREO MUSIC
You can listen to stereo music from your Bluetooth wireless audio device. The Bluetooth audio device must be paired with
the EXPAND by following the “Bluetooth Stereo Device Pairing” procedures described in the 7.3 chapter. The EXPAND
supports the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP,
you can use the EXPAND to remotely control music playback. You not only can adjust the volume but also use the
functions such as play, pause, next track and previous track.
1. To adjust the volume, tap the (+) Button or the (-) Button.
2. To play or pause music, press the Center Button for 1 second until you hear a mid-tone double beep.
3. To track forward or track back, press the (+) Button or the (-) Button for 1 second until you hear a mid-tone single beep.
You can stop music streaming while you are listening to the music by pressing the (-) Button for 4 seconds until you hear
high tone double beeps.
9. MOBILE PHONE CALL MAKING AND ANSWERING
1. When you have an incoming call, tap the Center Button to answer the call.
2. You can also answer the incoming call by loudly speaking any word of your choice if Voice Activated Phone
Answering is enabled, unless you are connected to intercom.
3. To end a call, press the Center Button for 2 seconds until you hear a mid-tone single beep, or wait for the called
person to end the call.