User's Manual

| Snowtalk

headset to connect with two HFP devices at the same time.

1. To pair another mobile phone, press the (R) Button for 5 seconds until you hear multiple beeps and hear a voice

prompt saying “Phone pairing”.

2. Within 2 seconds, tap the (R) Button. You will hear a voice prompt saying “Multipoint pairing”.

3. Search for Bluetooth devices on your mobile phone. Select the headset in the list of the devices detected on the

mobile phone.

4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.

5. The mobile phone confirms that pairing has been completed and the headset is ready to use. You will hear a

voice prompt from the headset saying “Your headset is paired”.

5.3 Bluetooth Stereo Device Pairing

1. If the Bluetooth stereo device is integrated with the mobile phone such as smartphones, you don’t need to pair the

headset with it separately. When the headset is paired with the mobile phone, it is also paired as a stereo music

device.

2. If you have a stand alone Bluetooth stereo device, follow the pairing procedure in “6.1 Mobile Phone Pairing”.

Note:

1. If Bluetooth connection between the headset and a mobile phone is disconnected, tap the (R) Button for one second

to recover the Bluetooth connection immediately.

2. If Bluetooth connection between the headset and a media player is disconnected, press the (L) Button for one

second to recover the Bluetooth connection and play.

5.4 Intercom Pairing with other Snowtalk headsets

The Snowtalk can be paired with up to three other headsets for Bluetooth intercom conversation.

1. Turn on the two Snowtalk headsets (A and B) that you would like to pair with each other.

2. Press and hold the (L) Button of the headset A and B for 5 seconds. You will hear a voice prompt saying “Intercom

pairing”.

3. Simply tap the (L) Button of any one of the two headsets A or B (It doesn’t matter that you choose A or B.) and wait

until the intercom connection is established. The two headsets A and B will be paired with each other for intercom

conversation. If the pairing process is not completed within one minute, the Snowtalk will return to stand-by mode.

4. You can make other pairings between the headset A and C, and between the headset A and D by following the

same procedure as above.

5. The intercom pairing queue is ‘Last-Come, First-Served’. If a headset has multiple paired headsets for intercom

conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second

intercom friend, and third intercom friend. For example, after the pairing procedures listed above, headset D is the

first intercom friend of headset A. Headset C is the second intercom friend of headset A, and headset B is the

third intercom friend of headset A.