User's Manual

| Snowtalk
15
11. INTERCOM AND MOBILE PHONE CALL
1. When you have an incoming mobile phone call during an intercom conversation, you will hear a ring tone. You can
choose whether to 1) answer the mobile phone call and stop the intercom conversation, or 2) reject the phone call and
stay on the intercom conversation.
a. To answer the phone call and stop the intercom conversation, tap the (L) Button. When you hang up the phone
call, the intercom will be automatically recovered.
b. To reject the phone call and stay on the intercom conversation, press the (R) Button for 2 seconds until you hear
a beep.
2. When you have an incoming intercom call during a mobile phone call, you will hear 4 high tone beeps, alerting you
that there is an incoming intercom call. You will also hear a voice prompt saying “Intercom requested”. In this case,
the intercom call does not override the mobile phone call because intercom has lower priority than mobile call. You
have to hang up the mobile phone call to receive an intercom call.
3. You can make an intercom call to the intercom friend by tapping the (L) Button to form a three-way conference call
with the person on the mobile phone line. To disconnect the intercom first and go back to your private mobile phone
call, terminate the intercom by tapping the (L) Button. To end the mobile phone call first and maintain the intercom
conversation, press the (R) Button for one second.
Start Tap (L) Button while having a mobile phone call
End intercom first Tap (L) Button
End phone call first
Press (R) Button for one second
or
Wait for the called person to end the call
Start & End Three-way Conference Phone Call
12. SNOWTALK CONFIGURATION SETTING
You can set the configuration of the headset by the voice menu instruction as below.
1. To enter into voice configuration menu, press and hold either the (L) Button or the (R) Button for 10 seconds until you
hear high-tone double beeps. You will also hear a voice prompt saying “Configuration menu”.
2. Press the (L) Button to navigate through the menus. You will hear voice prompts for each menu items as below.
3. You can enable or disable the feature or execute the command by tapping the (R) Button.
4. If none of the buttons is pressed within 10 seconds, the Snowtalk will exit the configuration and goes back to stand-
by.