User's Manual

| Snowtalk
16
5. If you want to exit the configuration immediately, press the (L) Button until you hear a voice prompt “Exit
configuration”, and tap the (R) Button.
The voice prompt for each menu item is as below:
(1) Phone pairing
(2) Multipoint pairing
(3) Voice prompt
(4) Sidetone
(5) Noise control
(6) Delete all pairings
(7) Factory reset
(8) Exit configuration
12.1 Mobile Phone Pairing
Voice Prompt
“Phone pairing”
Factory Default N/A
To go into mobile phone pairing mode, tap the (+) Button or the (-) Button until you hear the voice prompt, “Phone
pairing”. Please refer to section 5.1 for details on mobile phone pairing. If you tap the (L) Button or the (R) Button, you
can exit from the phone pairing mode.
12.2 Multipoint Pairing
Voice Prompt
“Multipoint pairing”
Factory Default N/A
To go into multipoint pairing mode, tap the (L) Button or the (R) Button until you hear the voice prompt, “Multipoint
pairing”. Please refer to section 5.2 for details on multipoint pairing. If you tap the (L) Button or the (R) Button, you can
exit from the multipoint pairing mode.
12.3 Enabling/Disabling Voice Prompt
Voice Prompt
“Voice prompt”
Factory Default Enable
Enable / Disable Tap the (R) Button
You can disable voice prompts, but the following voice prompts are always on.
- Voice prompts for configuration setting menu