User's Manual

| Snowtalk

3. INSTALLING THE SNOWTALK ON YOUR HELMET

1. Place the left and right speakers in the ear pockets of your helmet. Make sure the speakers are facing towards your

ears.

2. Hide the wires in the back of the helmet.

3. If you want to deliver your voice more clearly, you can install the external microphone on your helmet. Plug in the

microphone to the right speaker.

4. Wrap the microphone’s velcro around the chin strap with the microphone facing downwards.

4. BASIC FUNCTIONS

4.1 Powering On/Off

To power on the Snowtalk, press the (L) Button and the (R) Button simultaneously for one second to power on. You will

hear ascending beeps and “Hello”. To power off, press the (L) Button and the (R) Button at the same time. You will hear

descending beeps and “Goodbye”.

4.2 Charging

When the battery is low, you will hear mid-tone triple beeps and a voice prompt, “Low Battery”. You can charge the

Snowtalk by connecting the supplied USB power & data cable into a computer USB port or USB wall charger. You can

use any standard micro-USB cable to charge the Snowtalk. The charging LED is red while charging, and turns to blue

when the headset is fully charged. It takes about 2.5 hours to be completely charged.

Note:

1. The USB Power & Data Cable is also used for firmware upgrade of the Snowtalk.

2. The USB wall charger is not included in the package. Any 3rd party USB charger can be used with Sena products if the

charger is approved by either FCC, CE, IC, or other locally approved agencies that Sena accepts. Please contact Sena

regarding locally approved agencies Sena accepts.

4.3 Checking the Battery Level

When the headset is powering on, the red LED flashes rapidly indicating the battery level.

4 flashes = High, 70~100%

3 flashes = Medium, 30~70%

2 flashes = Low, 0~30%

4.4 Volume Adjustment