User's Manual

3. Align the arrows on the clamp unit and speaker cables and insert speaker cables into each speaker connector.
Note:
1. Three cables connect to the clamp unit. The longest is the cable for the right speaker. The second longest cable is for
the left speaker. The shortest cable is for the microphone.
2. If the helmet has deep ear pockets, you can use the speaker pads to bring the speakers closer to your ears.
3.3 Installing the Microphones
3.3.1 Using the Wired Boom Microphone
1. Peel off the cover of the hook and loop fastener for wired boom microphone to expose the adhesive tape. Then,
attach the hook and loop fastener on the inside surface of the left external shell.
2. Attach the wired boom microphone’s mounting plate to the hook and loop fastener.