User's Manual

Note:
1. After you install the wired boom microphone, make sure you reinstall the helmet’s internal padding.
2. You can use the boom microphone holder after attaching the hook and loop fastener for boom microphone holder on
it to ensure secure installation.
3. Make sure that the microphone’s receiver is located near your mouth.
4. Adjust the head of the microphone so that the tab is facing away from your mouth.
5. Align the arrows on the clamp unit and microphone cables and insert the microphone cable into the microphone
connector.
Note:
Three cables connect to the main unit. The longest is the cable for the right speaker. The second longest cable is for the left
speaker. The shortest cable is for the microphone.