User's Manual

3.3.2 Using the Wired Microphone
If you have a full face helmet, you can use the wired microphone.
1. Peel off the cover of the hook and loop fastener for wired microphone to expose the adhesive tape. Then, attach the
hook and loop fastener on the inside of the helmet’s chin guard.
2. Attach the wired microphone to the hook and loop fastener for wired microphone.
3. Align the arrows on the clamp unit and microphone cables and insert the microphone cable into the microphone
connector.
Note:
1. After connecting all cables, store any excess cables behind the internal padding of helmet to prevent wires from
becoming damaged.
2. Three cables connect to the main unit. The longest is the cable for the right speaker. The second longest cable is for
the left speaker. The shortest cable is for the microphone.
CAUTION
When you remove the headset, make sure that you first detach all cables from the clamp unit. Then it is safe to remove the
main unit and clamp unit in order.