User's Manual

the Sena Smartphone App for Android or iPhone from www.sena.com/app.
5 PAIRING THE 10S WITH BLUETOOTH DEVICES
Before using the 10S Bluetooth headset with any other Bluetooth devices for the first time, you will need to pair them together.
You can pair the 10S with Bluetooth mobile phones, Bluetooth stereo devices such as MP3 players, or motorcycle specific
Bluetooth GPS navigation, and with other Sena Bluetooth headsets. The pairing operation is required only once for each
Bluetooth device. The headset remains paired with the devices and automatically reconnects to them when they are within
range. You will hear a high toned single beep and a voice prompt whenever the headset reconnects to the paired device:
“Phone connected” to a mobile phone, “Media connected” to a Bluetooth stereo device.
5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device
1. Press and hold the Phone Button for 5 seconds until you hear a voice prompt, “Phone pairing”
2. Search for Bluetooth devices on your mobile phone. Select the Sena 10S in the list of the devices detected on the mobile
phone.
3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
4. The mobile phone confirms that pairing has been completed and the 10S is ready to use. You will hear a voice prompt,
“Your headset is paired”.
5. If the pairing process is not completed within three minutes, the 10S will return to stand-by mode.
Note:
1. If the Bluetooth connection between the headset and a mobile phone is disconnected, tap the Phone Button to recover the
Bluetooth connection immediately.
2. If the Bluetooth connection between the headset and a media player is disconnected, press the Jog Dial for 1 second to
recover the Bluetooth connection and play.
5.2 Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10
Typical Bluetooth headsets can connect with only one HFP (Hands-Free-Profile) Bluetooth device such as mobile phone,
GPS, and Sena SR10, but second mobile phone pairing allows the headset to connect with two HFP devices simultaneously.
So, when you already have a mobile phone connected with the 10S, you can also pair and connect a second mobile phone or
other HFP devices.
1. To pair the HFP device, press and hold the Jog Dial for 8 seconds until the red LED flashes red rapidly and you hear voice
prompt, “Intercom pairing”.
2. Within 2 seconds, tap the Phone Button again, then the LED flashes blue rapidly and you will hear a voice prompt,
“Second mobile phone pairing”.
3. Search for Bluetooth devices on the HFP device. Select the Sena 10S in the list of the devices detected on the HFP device.
4. Enter 0000 for the PIN. Some HFP devices may not ask for the PIN.
5. The HFP device confirms that the pairing is completed and the 10S is ready to use. You will hear a voice prompt, “Your
headset is paired”.
Note: