User's Manual

7 STEREO MUSIC
7.1 By Bluetooth Wireless Stereo
The Bluetooth audio device must be paired with the 10S by following the “Bluetooth Stereo Device Pairing” procedures
described in the section 7.1. The 10S supports the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio
device also supports the AVRCP, you can use the 10S to remotely control music playback. Not only can you adjust the
volume but you can also use functions such as play, pause, next track and previous track.
1. To play or pause music, press and hold the Jog Dial for 1 second until you hear a double beep.
2. To adjust the volume, rotate the Jog dial.
3. To track forward or track back, rotate while pressing the Jog Dial clockwise or counter clockwise for 1 second until you hear
a mid-tone single beep.
7.2 By Stereo Audio Cable
Plug your stereo MP3 player directly to the 10S by using the enclosed 3.5mm stereo audio jack cable. To adjust the volume,
rotate the Jog dial on the headset. You may adjust the volume on the MP3 player also.