User's Manual

3. Perform the operation required for handsfree pairing on the non-Sena Bluetooth headset (refer to the User’s Guide for the
headsets you want to use). The 10S will automatically pair with a non-Sena Bluetooth headset when each are in pairing mode.
11.2 Two-way Universal Intercom
You can initiate the Universal Intercom connection with non-Sena Bluetooth headsets using the same intercom connection
method as you would between other Sena headsets. You may single tap the Jog Dial to begin an intercom conversation with
the first intercom friend, double tap with the second intercom friend, and triple tap with the third intercom friend.
Non-Sena Bluetooth headsets may initiate the Universal Intercom connection, by activating the voice dialer or using the
redialing operation. You may also disconnect the existing connection by using the operation to end a call (refer to the User’s
Guide of the headsets for voice dialer, redialing, and ending a call).
11.3 Three-way Universal Intercom
You may make a three-way Universal Intercom connection with two 10Ss and one non-Sena Bluetooth headset. If the
intercom connection is made, all headsets connected cannot use the mobile phone call function since the connection
between the headset and the phone is disconnected temporarily. If you disconnect the intercom call, the mobile phone
connection is made again automatically so that you can use a mobile phone call function.
1. You (A) need to be paired with a non-Sena Bluetooth headset (B) and another 10S headset (C) for the three-way
conference intercom.
2. Start an intercom conversation with non-Sena Bluetooth headset (B) in your intercom group. For example, you (A) may
start an intercom conversation with non-Sena Bluetooth headset (B). The non-Sena Bluetooth headset (B) may also start an
intercom call with you (A).
3. The other 10S (C) may join the intercom by making an intercom call to you (A).