User's Manual

call.
14.4 Enabling/Disabling Voice Activated Intercom
Voice Prompt
“VOX intercom”
Factory Default
Disable
Enable
Tap the Phone Button
Disable
Tap the Jog Dial
If this feature is enabled, you can initiate an intercom conversation with the last connected intercom friend by voice. When
you want to start intercom, say a word such as “Hello” loudly or blow air into the microphone. If you start an intercom
conversation by voice, the intercom terminates automatically when you and your intercom friend remain silent for 20 seconds.
However, if you manually start an intercom conversation by tapping the Phone Button, you have to terminate the intercom
conversation manually.
However, if you start intercom by voice and end it manually by tapping the Phone Button, you will not be able to start intercom
by voice temporarily. In this case, you have to tap the Phone Button to restart the intercom. This is to prevent repeated
unintentional intercom connections by strong wind noise. After rebooting the 10S, you can start intercom by voice again
14.5 Enabling/Disabling HD Intercom
Voice Prompt
“HD intercom”
Factory Default
Enable
Enable
Tap the Phone Button
Disable
Tap the Jog Dial
HD Intercom enhances the two-way intercom audio from normal quality to HD quality. HD Intercom will become temporarily
disabled when you enter into a multi-way intercom. If this feature is disabled, the two-way intercom audio will change to
normal quality.
14.6 Enabling/Disabling Voice Prompts
Voice Prompt
“Voice prompt”
Factory Default
Enable
Enable
Tap the Phone Button
Disable
Tap the Jog Dial
You can disable voice prompts by configuration setting, but the following voice prompts are always on.
- Voice prompts for configuration setting menu