User's Manual

DWO-5
14
4. After selecting the last number redial menu,
you will hear a voice prompt, “Last number
redial”. Then, to redial the last phone call
number, tap the Center Button.
5. To call one of the speed dials, tap the (+)
Button or the (-) Button to navigate between
the menus until you hear a voice prompt,
“Speed dial (#)”. Then, tap the Center
Button.
6. If you want to exit the speed dial immediately,
tap the (+) Button or the (-) Button until
you hear voice prompt, “Cancel”, and tap
the Center Button. If you do not press any
button within 15 seconds, the headset will
exit the voice speed dial menu and go back
to stand-by mode.
Note:
1. Make sure that you connect the mobile
phone and the headset to use the speed dial
function.
2. You need to assign speed dial numbers
before using the speed dial (please refer to
section 8.5, “Assigning Speed Dial”).
3.3 GPS Navigation
If you pair a Bluetooth GPS to the headset as
described in section 2.2, “Multipoint Pairing -
Second Mobile Phone, GPS, and SR10” , you
can listen to GPS instructions wirelessly. Tap the
(+) Button or the (-) Button to adjust volume.
The GPS voice instruction interrupts intercom
conversation but it is automatically reestablished
after the GPS voice instruction ends.