User's Manual

DWO-5
20
6.1 Universal Intercom Pairing
The headset can be paired with non-Sena
Bluetooth headsets for Bluetooth intercom
conversation. You can pair the headset with
only one non-Sena Bluetooth headset so if you
pair with a different non-Sena Bluetooth
headset, the previous pairing will be removed.
1. Turn on the headset and a non-Sena
Bluetooth headset that you want to pair with.
2. Press and hold the Center Button for 8
secondsuntiltheblueLEDwillashrapidly
and you will hear multiple beeps. You will
hear a voice prompt, “Universal intercom
pairing”.
3. Perform the operation required for handsfree
pairing on the non-Sena Bluetooth headset
(refer to the User’s Guide for the headsets
you want to use). The headset will
automatically pair with a non-Sena Bluetooth
headset when each are in pairing mode.
6.2 Two-way Universal Intercom
You can initiate the Universal Intercom
connection with non-Sena Bluetooth headsets
using the same intercom connection method as
you would between other Sena headsets. You
may single tap the Center Button to begin an
intercom conversation with the rst intercom
friend, double tap with the second intercom
friend, and triple tap with the third intercom
friend.
Non-Sena Bluetooth headsets may initiate the
Universal Intercom connection, by activating
the voice dialer or using the redialing operation.
You may also disconnect the existing connection
by using the operation to end a call (refer to the
User’s Guide of the headsets for voice dialer,
redialing, and ending a call).