User's Manual

DWO-5
9
Note:
1. The Sena SR10 is a Bluetooth two-way radio
adapter for group communication, and uses
Hands-Free Profile. The incoming audio from
the two-way radio via SR10 is heard in the
background while having an intercom
conversation or a mobile phone call.
2. The GPS navigation or a radar detector
could be connected to the SR10 by wire.
The GPS voice instruction or the radar
detector alarm is also heard in the
background via SR10 while having an
intercom conversation or a phone call.
Please refer to the SR10 User’s Guide for
details.
2.3 Advanced Selective Pairing:
A2DP Stereo or Handsfree
When you are using a smartphone, sometimes
you may need to selectively use the headset for
A2DP stereo music only or for mobile phone
handsfree only. These instructions are for
advanced users who want to pair the headset to
their smartphones with only one selective
prole:A2DPforstereomusicofHFPforphone
calls.
If you have previously paired a mobile phone to
the headset, you must clear the previous pairing
list on both devices: the mobile phone and the
headset. To clear the pairing list on the headset,
please do a factory reset or following the pairing
list clearing procedure described in section
8.10, “Factory Reset” or 8.9, “Delete All
Bluetooth Pairing Information” . To clear the
pairing list on the mobile phone, please refer to
the mobile phone manual. For most
smartphones, delete the headset from the list of
Bluetooth devices in the settings menu.