www.sena.
SPH10 © 1998-2016 Sena Technologies, Inc. All rights reserved. Sena Technologies, Inc. reserves the right to make any changes and improvements to its product without providing prior notice. Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. PRISM™, 20S™, 3S™, SMH10™, SMH10R™, SMH5™, SMH5-FM™, SPH10™, SPH10H™, EXPAND™, SPH10H-FM™, SPH10S™, SR10™, SR10i™, SM10™, Bluetooth Pack for GoPro® are trademarks of Sena Technologies, Inc. or its subsidiaries.
SPH10 1. INTRODUCTION..................................................................5 2. PACKAGE CONTENTS.......................................................6 3. WEARING THE SPH10........................................................7 3.1 3.2 Microphone Installation...............................................................7 Placing the Headset on Your Ear................................................8 4. POWERING ON/OFF AND CHARGING..............................8 4.1 4.2 4.3 4.4 4.
SPH10 16. UNIVERSAL INTERCOM...................................................32 16.1 16.2 16.3 16.4 Universal Intercom Pairing........................................................32 Two-way Universal Intercom.....................................................33 Three-way Universal Intercom...................................................33 Four-way Universal Intercom.....................................................35 17. MUSIC SHARING...........................................................
SPH10 Thank you for choosing the Sena SPH10, Bluetooth Stereo Headset and Intercom for outdoor sports and activities. With the SPH10, you can call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with other SPH10 users. The SPH10 is compliant with the Bluetooth 3.
SPH10 2.
SPH10 • Mini Microphone • USB Power & Data Cable • Stereo Audio Cable • Boom Microphone Sponges 3. WEARING THE SPH10 English • Boom Microphone 3.1 Microphone Installation Two microphones are included in the package: a long-boom microphone for high noise environment and a short microphone for indoor use. Plug the microphone into the microphone port to fit triangle marks as described in the below picture.
SPH10 Since SPH10 is mostly exposed on external environment where noise prevails, microphone can be selected according to the noise level. For the highly noisy environment, boom-microphone is recommended allowing microphone to stay near user’s mouth. For the less-noisy environment, mini microphone is recommended allowing users to move freely. 3.2 Placing the Headset on Your Ear The speaker with microphone should be placed on the left ear. Then you can place earhooks over ears as shown: 4.
SPH10 4.4 Low Battery Warning 4.5 Checking the Battery Level You can check the battery level in two different ways when the headset is powering on. 4.5.1 LED Indicator When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 flashes = High, 70~100% 3 flashes = Medium, 30~70% 2 flashes = Low, 0~30% 5.
SPH10 6. PAIRING THE SPH10 WITH BLUETOOTH DEVICES Before using the SPH10 Bluetooth headset with any of Bluetooth devices for the first time, you need to do the pairing operation. It can be paired with Bluetooth mobile phones, Bluetooth stereo devices such as MP3, or motorcycle specific Bluetooth GPS, and with other Sena Bluetooth headsets. This pairing operation is only required once for each Bluetooth device.
SPH10 6.3 Bluetooth Stereo Device Pairing 1. If the Bluetooth stereo device is integrated with the mobile phone such as smartphones, you don’t need to pair the SPH10 with it separately. When the SPH10 is paired with the mobile phone, it is also paired as a stereo music device. 2. If you have a stand alone Bluetooth stereo device, follow the paring procedure separately. The procedure is the same as the procedure in “6.1 Mobile Phone Pairing”. Note: 1.
SPH10 systems use mobile phone profile for turn-by-turn voice instruction. You can simultaneously use a mobile phone and a GPS which uses mobile phone profile by one of the following procedures. 6.4.1 Multipoint GPS Pairing If you use GPS only for turn-by-turn voice instructions, not for Bluetooth stereo music streaming, multipoint pairing is recommended for the GPS connection. Multipoint Bluetooth pairing allows the SPH10 to connect two HFP devices at the same time: mobile phone and GPS navigation.
SPH10 English 6.4.2 GPS Pairing as Mobile Phone If GPS is not only used for turn-by-turn voice instructions but also is your preferred Bluetooth stereo music source, you can pair the GPS to the SPH10 by following the simple procedures in “6.1 Mobile Phone Pairing”. When you do this, the SPH10 thinks the GPS is a mobile phone so you can no longer pair your mobile phone to the SPH10 directly.
SPH10 6.5 Pairing with the Sena SR10, Bluetooth Two-way Radio Adapter The Sena SR10 is a Bluetooth two-way radio adapter for group communication, and uses HFP as do most motorcycle specific GPS navigation systems. If you pair the SPH10 with a SR10 by multipoint pairing, the SPH10 is able to have two HFP devices at the same time: mobile phone and Sena SR10. 1. Turn on the headset and press the Jog Dial for 5 seconds until the red LED is rapidly flashing and you hear multiple beeps. 2.
SPH10 Smart Phone HFP + A2DP Wired Connection HFP SPH10 If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to selectively use the SPH10 for A2DP stereo music only or for mobile phone handsfree only. This instruction is for advanced users who want to pair the SPH10 to their smartphones only with one selective profile: A2DP stereo for music or HFP for phone call. Two-way radio Mobile Phone Pairing Multipoint Sena SR10 Pairing Wired Connection English 7.
SPH10 2. Within 2 seconds, tap the Jog Dial again, then the LED turns to red flashing and the beeps turn to double mid-tone beeps. You will hear a voice prompt saying “Media selective pairing”. 3. Search for Bluetooth devices on your smartphone. Select the Sena SPH10 in the list of devices detected on your phone. 4. Enter 0000 for the PIN. Some smartphones may not ask for PIN. 7.2 HFP for Phone Call Only 1.
SPH10 B D C Note: Pairing A & B 4. You can make other pairings between the headset A and C, and between the headset A and D by following the same procedure as above. A B A D C B D For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is the second intercom friend of headset A, and headset B is the third intercom friend of headset A. 8.
SPH10 9. SPH10 CONFIGURATION SETTING You can set the configuration of the SPH10 by the voice menu instruction as below. 1. To enter into voice configuration menu, press and hold the Jog Dial for 12 seconds until the LED shows solid blue and you hear high tone double beeps. You will also hear a voice prompt saying “Configuration menu”. 2. Rotate the Jog Dial clockwise or counter-clockwise to navigate between the menus. You will hear voice prompts for each menu items as below. 3.
SPH10 Note: 1. A fter assigning a phone number to one of three speed dials, you can continually assign another phone number to the rest of two speed dials. 2. You can assign phone numbers to speed dials in your PC. Please visit the Sena Bluetooth web site at www. sena.com for more information. 9.2 Enabling/Disabling Voice Activated Phone Answering Voice Prompt “VOX phone” Factory Default Enable Enable Tap the Phone Button Disable Tap the Jog Dial English 2.
SPH10 friend by speaking any word loudly enough.The most effortless way to trigger intercom VOX is to blow into the microphone as if blowing dust off the microphone. If you start an intercom conversation by VOX, the intercom terminates automatically when you and your intercom friend remain silent for 20 seconds. However, if you manually start an intercom conversation by tapping the Jog Dial, you have to terminate the intercom conversation manually.
SPH10 Voice Prompt "Noise control" Factory Default Enable Enable Tap the Phone Button Disable Tap the Jog Dial When Advanced Noise Control is enabled, the background noise is reduced during an intercom conversation. When it is disabled, the background noise is mixed with your voice during intercom. Note: If you use your SPH10 with the Bluetooth Audio Pack for GoPro or Prism, you can enable or disable this feature only during Normal Audio Recording Mode.
SPH10 Rotate Jog Dial Tap Phone Button Tap Jog Dial Speed Dial Execute N/A VOX Phone Enable Disable VOX Intercom Enable Disable Voice Prompt Enable Disable Sidetone Enable Disable Advanced Noise Control Enable Disable Delete All Pairings Execute N/A Exit Configuration Execute N/A Voice Configuration Menu & Button Operations 22 10.
SPH10 You can listen to stereo music in two ways: with the enclosed stereo audio cable or by Bluetooth wireless stereo. Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the SPH10 to remotely control music playback. You not only can adjust the volume but also use the functions such as play, pause, next track and previous track. 1. To adjust the volume, rotate the Jog Dial. 11.
SPH10 3. To track forward or track back, rotate while pressing the Jog Dial clockwise or counter clockwise. 12. MOBILE PHONE CALL MAKING AND ANSWERING 12.1 Mobile Phone Call Making and Answering Note: Bluetooth music is available only when the MP3 jack port remains open. Please make sure the audio cable is unplugged from the clamp unit to play music by Bluetooth. 24 1. When you have an incoming call, simply tap the Phone Button or the Jog Dial to answer the call. 2.
SPH10 Note: 1. I f you are using multipoint mobile phone connection and you have an incoming call from the second phone during the call of the first phone, then you may still receive the call from second phone. In this case, the call from the first phone is on waiting mode. If you end a call, then it will automatically guide you to the first phone call. 2. If you are using multipoint connection of mobile phone and GPS, you may not be able to listen to the GPS voice instruction during the phone call. 12.
SPH10 6. If you want to exit the speed dial immediately, rotate the Jog Dial until you hear a voice prompt saying “Cancel”, and tap the Phone Button or the Jog Dial. If any button is not pressed within 15 seconds, the SPH10 will exit the voice speed dial menu and goes back to stand-by mode. Note: Make sure that you connect the mobile phone and the headset in order to use the speed dial function.
SPH10 Terminate End Two-way Intercom Conversation Start intercom End intercom 1st intercom friend 2nd intercom friend 3rd intercom friend Single tap Double tap Triple tap Single tap Note: To avoid unintended disconnections by accidentally tapping the Jog Dial, you can lock the current intercom conversation. Rotate while pressing the Jog Dial during intercom to lock or unlock it. When locked, the intercom conversation will not be terminated even if you tap the Jog Dial.
SPH10 13.3 Intercom and GPS 13.4 Intercom and Two-way Radio If you pair a Bluetooth GPS to the SPH10 as described in 6.3 of this user's guide, you can hear the turn-by-turn voice instruction of the GPS while having an intercom conversation. The GPS voice instruction interrupts intercom conversation, but it is automatically reestablished after the GPS voice instruction ends. As described in 6.
SPH10 Smart Phone Wired Connection Audio from Two-way Radio SPH10 Intercom 14.1 Start Three-way Intercom Two-way radio HFP + Mobile Phone Pairing A2DP Multipoint Pairing Intercom Pairing English 14. THREE-WAY CONFERENCE INTERCOM Wired Connection Sena SR10 Wired Connection GPS You (A) can have a three-way conference intercom with two other SPH10 friends (B & C) by establishing two intercom connections at the same time.
SPH10 1. You (A) need to be paired with two other friends (B & C) for three-way conference intercom. i Pa g First Friend (B) Second Friend (C) 2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom conversation with the intercom friend (B). Or intercom friend (B) may start an intercom call with you (A). 30 First Friend (B) Second Friend (C) Second Friend (C) 4.
SPH10 14.2 End Three-way Intercom Jog Dial Operation Press for 1” 15. FOUR-WAY CONFERENCE INTERCOM 15.1 Start Four-way Intercom You can have four-way conference intercom with three other SPH10 users by adding one more intercom participant to the three-way intercom. While you are having three-way intercom as above in section 14.1, a new participant (D), who is an intercom friend of your intercom friend (C), may join the conference intercom by making an intercom call to your intercom friend (C).
SPH10 15.2 End Four-way Intercom As same in the case of three-way intercom, you can completely get out of the four-way conference intercom or just disconnect a single intercom connection. 1. Press the Jog Dial for 1 second until you hear a beep to terminate four-way conference intercom. It terminates the intercom connections between you (A), and your intercom friends (B), (C) and (D). 2. Tap or double tap the Jog Dial to disconnect the intercom connection with one of the two intercom friends accordingly.
SPH10 g (B) (A) rin i Pa Non-Sena Bluetooth headsets may initiate the Universal Intercom connection, activating the voice dialing or using the redialing operation. You may also disconnect the existing connection by ending a call operation function (refer to the users’ manual of the headsets for voice dialing, redialing, and ending a call).
SPH10 2. Start an intercom conversation with non-Sena Bluetooth headset (B) in your intercom group. For example, you (A) may start an intercom conversation with non-Sena Bluetooth headset (B). The non-Sena Bluetooth headset (B) may also start an intercom call with you (A). (A) (B) (C) (A) 34 (A) (B) 3. The Other SPH10 (C) may join the intercom by making an intercom call to you (A). (B) 4.
SPH10 16.4 Four-way Universal Intercom You may have a couple of other four-way Universal Intercom configurations, 1) your headset (A), a nonSena Bluetooth headset (B), another SPH10 (C), and a non-Sena Bluetooth headset (D), 2) your headset (A), a non-Sena Bluetooth headset (B), and two other SPH10 headsets (C and D). You may make the four-way Universal Intercom call the same way as a normal fourway intercom call. (A) (C) (D) (B) 2.
SPH10 3. The non-Sena Bluetooth headset (D) may join the conference intercom by making an intercom call to the SPH10 (C). (A) 16.4.2 Four-way Universal Intercom Case 2 Three SPH10 headsets (A, C and D) and one non-Sena Bluetooth headset (B). The procedure is the same as the case 1 described in section 16.4.1. (C) (A) (D) (B) 4. Now two SPH10 headsets (A & C) and two non-Sena Bluetooth headsets (B & D) are connected with the four-way Universal Intercom.
SPH10 You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation. When you terminate music sharing, you can go back to the intercom conversation. To start or terminate sharing music, press and hold the Jog Dial for 1 second during an intercom conversation until you hear a double beep and you and your intercom friend will listen to or terminate sharing music.
SPH10 Start End intercom first End phone call first Tap Jog Dial while having a mobile phone call Tap Jog Dial Press Jog Dial for 2” or Tap Phone Button or Wait for the called person to end the call Start & End Three-way Conference Phone Call 38 19. INTERCOM FAILURE When you try to start an intercom conversation with an intercom friend who is already having a conference intercom with other riders or a mobile phone call, you will hear a low tone double beep signifying an intercom busy signal.
SPH10 If your intercom friend goes out of range while having an intercom conversation, you may hear static noise and eventually the intercom will be disconnected. In this case, the SPH10 automatically tries to reconnect the intercom every 8 seconds and you will hear high tone double beeps until the intercom is reestablished. If you don’t want to make a reconnection, tap the Jog Dial to stop the attempt. 21. RESET TO FACTORY DEFAULT SETTINGS English 20. INTERCOM RECONNECTION 1.
SPH10 22. FAULT RESET When the SPH10 is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button at the back of the headset main unit. Insert a paper clip into the reset pin-hole and press the reset button for a second with light pressure. The SPH10 will be switched off, and you have to turn the system back on and try again. However, this will not restore the headset to factory default settings. 40 23.
SPH10 Case 1 English 24.
SPH10 Case 2 Bluetooth Pairing Procedure 1 GPS - Mobile Phone Pairing 2 Mobile Phone Pairing 3 Intercom Pairing GPS - Mobile Phone Pairing Bluetooth GPS* Mobile Phone Pairing Intercom Pairing 42 Mobile Phone Bluetooth GPS* zumo 550/660/665, TomTom Rider Usage • GPS zumo 660/665: GPS instruction, phone call, listening to music zumo 550, TomTom Rider: GPS instruction, phone call • Intercom
SPH10 Case 3 Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider Bluetooth GPS* Mobile Phone Pairing Intercom Pairing Multipoint Pairing English Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Multipoint Pairing 3 Intercom Pairing Usage • Mobile Phone: phone call • GPS zumo 660/665: GPS instruction, listening to music zumo 220/350/550, TomTom Rider: GPS instruction • Intercom Mobile Phone 43
SPH10 Case 4 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Intercom Pairing Mobile Phone Bluetooth GPS* Yupiteru, smartphone apps Mobile Phone Pairing Intercom Pairing 44 Mobile Phone Pairing Usage • Mobile Phone: phone call • GPS: GPS instruction • Intercom Bluetooth GPS*
SPH10 Case 5 Mobile Phone GPS Mobile Phone Pairing English Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Multipoint Pairing 3 Intercom Pairing Usage • Mobile Phone: phone call • SR10: two-way radio, GPS guidancel • Intercom SR10 Multipoint Pairing Intercom Pairing Two-way Radio 45
SPH10 Case 6 Bluetooth Pairing Procedure 1 GPS - Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing 4 Intercom Pairing MP3 Player Mobile Phone Pairing Mobile Phone 46 GPS Mobile Phone Mobile Phone Pairing Pairing Bluetooth GPS* Intercom Pairing Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider Usage • GPS: phone call, GPS instruction • MP3 Player: listening to music • Intercom
SPH10 Case 7 Mobile Phone Pairing GPS Multipoint Pairing Mobile Phone Pairing English Mobile Phone Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing 4 Multipoint Pairing 5 Intercom Pairing Usage • Mobile Phone: phone call • SR10: two-way radio, GPS instruction • SM10: listening to music/sharing • Intercom Intercom Pairing Mobile Phone Pairing Two-way Radio 47
SPH10 25.
SPH10 FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules.
SPH10 1999/5/EC. For further information, please consult www. sena.com. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. Industry Canada Statement This device complies with Industry Canada licenseexempt RSS standard(s).
SPH10 Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and/or damage to property. Product Storage and Management • Keep the product free of dust. It may damage mechanical and electronic parts of the product. • Do not store the product in high temperatures as this may reduce the life span of electronic devices, damage the battery, and/or melt plastic parts of the product. • Do not store the product in cold temperatures.
SPH10 • In any place where wireless communication is prohibited, such as hospitals or airplanes, turn off the power and refrain from using the product. In a place where wireless communication is prohibited, electromagnetic waves may cause hazards or accidents. • Do not use the product near hazardous explosives. When it is near any explosion hazards, turn off the power and heed any regulations, instructions, and signs in the area.
SPH10 • Do not use the product with a damaged battery. It may explode and/or cause accidents. • Never use a damaged charger. It may explode and/ or cause accidents. • Battery life may vary depending on conditions, environmental factors, functions of the product in use, and devices used with it. PRODUCT WARRANTY AND DISCLAIMER Limited Warranty Limited Warranty Sena Technologies, Inc.
SPH10 • In the event the manufacturer's name, serial number, product label, or other markings have been modified or removed. • In the event any unauthorized person has tried to disassemble, repair, or modify the product. Notice and Waiver By buying and using this product, you relinquish considerable legal rights including any claim for compensation for damages. Therefore, be certain to read and understand the following terms and conditions before using the product.
SPH10 Warranty Exclusions Reasons for Limited Liabilities If you do not return the product after purchasing it, you relinquish all rights to liabilities, loss, claims, and claims for reimbursement of expenses (including attorney's fees). Therefore, Sena will not be liable for physical injury, death, or any loss or damage of transportation means, possessions, or assets which belong to you or third parties that may have occurred while you use the product.
SPH10 Limitation of Liability TO THE FULL EXTENT ALLOWED BY LAW, SENA EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF
SPH10 English Warranty Service To obtain product warranty service, send the defective product, at your expense, to the manufacturer or the seller along with proof of purchase (a receipt that shows the purchase date, a product registration certificate of the Website, and other relevant information). Take necessary measures to protect the product. In order to get a refund or replacement, you must include the whole package as it was purchased.
2.4.1 www.sena.com User’s Guide for Firmware v5.
