User's Manual

SPH10
18
9. SPH10 CONFIGURATION SETTING
You can set the conguration of the SPH10 by the
voice menu instruction as below.
1.Toenterintovoicecongurationmenu,pressand
hold the Jog Dial for 12 seconds until the LED
shows solid blue and you hear high tone double
beeps. You will also hear a voice prompt saying
“Conguration menu”.
2. Rotate the Jog Dial clockwise or counter-clockwise
to navigate between the menus. You will hear voice
prompts for each menu items as below.
3. You can enable the feature or execute the
command by tapping the Phone Button, or disable
the feature by tapping the Jog Dial.
4. If any button is not pressed within 10 seconds, the
SPH10willexitthecongurationandgoesbackto
stand-by.
5.If you want to exit the conguration immediately,
rotate the Jog Dial until you hear a voice prompt
saying “Exit conguration”, and tap the Phone
Button.
Thevoicepromptforeachmenuitemisasbelow:
(1) Speed Dial (5) Sidetone
(2) VOX phone (6) Noise control
(3) VOX intercom (7) Delete all pairings
(4) Voice prompt
(8) Exit conguration
Speed Dial
Voice prompt
Sidetone
Exit configuration
Noise control
VOX phone
Delete all pairings VOX intercom
9.1 Assigning Speed Dial
Voice Prompt
“Speed dial”
Factory Default N/A
Execute Tap the Phone Button
1. To assign a phone number as a speed dial, rotate
the Jog Dial until you hear a voice prompt saying
“Speed dial”.