User's Manual

19
SPH10
English
2. Tap the Phone Button, and you will hear a voice
prompt saying “Speed dial one” and “Phone
connected”.
3. Rotate the Jog Dial to select one of three speed
dial numbers and you hear a voice prompt saying
“Speed dial (#)”.
4. Call a phone number you want to assign and you will
hear a voice prompt saying “Save speed dial (#)”.
The phone number is automatically assigned to the
selected speed dial number. Then the phone call will
hang up before being connected.
5. To exit the menu, rotate the Jog Dial clockwise or
counter clockwise until you hear a voice prompt
saying “Cancel”, and tap the Phone Button to
conrm. You will then hear a voice prompt saying
“Cancel”. If any button is not pressed within 1
minute, the SPH10 will exit the conguration menu
and go back to stand-by mode.
Note:
1. After assigning a phone number to one of three speed
dials, you can continually assign another phone
number to the rest of two speed dials.
2. You can assign phone numbers to speed dials in your
PC. Please visit the Sena Bluetooth web site at www.
sena.com for more information.
9.2 Enabling/Disabling Voice Activated
Phone Answering
Voice Prompt
“VOX phone”
Factory Default Enable
Enable Tap the Phone Button
Disable Tap the Jog Dial
If this feature is enabled, you can answer incoming
calls by simply saying a word loudly enough. For
example, when you hear a series of beeps for an
incoming call, you can answer the phone by saying
“Hello” or any other word loudly. This is enabled from
the factory but you can disable this. If this mode is
disabled, you have to tap the Jog Dial or the Phone
Button to answer an incoming call.
9.3 Enabling/Disabling Voice Activated
Intercom
Voice Prompt
“VOX intercom”
Factory Default Disable
Enable Tap the Phone Button
Disable Tap the Jog Dial
If this feature is enabled, you can initiate an intercom
conversation with the last connected intercom