User's Manual

21
SPH10
English
9.6 Enabling/Disabling Advanced Noise
Control™
Voice Prompt
"Noise control"
Factory Default Enable
Enable Tap the Phone Button
Disable Tap the Jog Dial
When Advanced Noise Control is enabled, the
background noise is reduced during an intercom
conversation. When it is disabled, the background
noise is mixed with your voice during intercom.
Note:
If you use your SPH10 with the Bluetooth Audio Pack for
GoPro or Prism, you can enable or disable this feature
only during Normal Audio Recording Mode. This feature
is automatically disabled while in Ultra HD (UHD) Audio
Mode.
9.7 Delete all Bluetooth Pairing Information
Voice Prompt
“Delete all pairings”
Factory Default N/A
Execute Tap the Phone Button
To delete all Bluetooth pairing information of the
SPH10, rotate the Jog Dial until you hear a voice
prompt saying “Delete all pairings”, and tap the
PhoneButtontoconrm.Tapping the Jog Dial is not
available for this setting.
9.8 ExitVoiceCongurationMenu
Voice Prompt
“Exit conguration”
Factory Default N/A
Execute Tap the Phone Button
To exit voice conguration menu and get back to
stand-by mode, rotate the Jog Dial until you hear a
voice prompt saying “Exit conguration”, and tap
thePhoneButtontoconrm.TappingtheJogDialis
not available for this setting.