User's Manual

SPH10
32
15.2 End Four-way Intercom
As same in the case of three-way intercom, you can
completely get out of the four-way conference intercom
or just disconnect a single intercom connection.
1. Press the Jog Dial for 1 second until you hear a
beep to terminate four-way conference intercom. It
terminates the intercom connections between you
(A), and your intercom friends (B), (C) and (D).
2. Tap or double tap the Jog Dial to disconnect
the intercom connection with one of the two
intercom friends accordingly. However, when
you disconnect the second friend (C) by double
tapping the Jog Dial, you will be disconnected with
the third participant (D) as well. This is because
the third participant (D) is connected with you via
the second friend (C).
Jog Dial Operation Result
Press for 1” Disconnect (B), (C) & (D)
Single tap Disconnect (B)
Double tap Disconnect (C) & (D)
End Four-way Intercom
16. UNIVERSAL INTERCOM
You can have an intercom conversation with non-
Sena Bluetooth headsets using the Universal Intercom
function. Non-Sena Bluetooth headsets can be
connected to the Sena Bluetooth headset if they support
the Bluetooth Hands-Free Prole (HFP). The working
distance may differ depending on the performance of
Bluetooth headset that it is connected to. In general, it
is shorter than normal intercom distance since it uses
theBluetoothHands-FreeProle.
16.1 Universal Intercom Pairing
The SPH10 can be paired with non-Sena Bluetooth
headsets for Bluetooth intercom conversation. You
can pair the SPH10 with only one non-Sena Bluetooth
headset; if you pair with a different non-Sena Bluetooth
headset, the previous pairing list will be removed.
1. Turn on the SPH10 and a non-Sena Bluetooth
headset which you want to pair with.
2. Press and hold the Jog Dial on the SPH10 for 8
secondsuntilthe blueLED ashesrapidly.Youwill
hear a voice prompt saying “Universal intercom
pairing”.