User's Manual

SPH10

English

3. Perform the operation required for handsfree pairing

on the non-Sena Bluetooth headset (refer to the

users’ manual of the headsets you want to use). The

SPH10 will automatically perform pairing with non-

Sena Bluetooth headsets in pairing mode.

16.2 Two-way Universal Intercom

You can initiate the Universal Intercom connection with

non-Sena Bluetooth headsets using the same intercom

connection method as you would between other Sena

headsets. You may single tap the Jog Dial to begin an

intercom conversation with the rst intercom friend,

double tap with the second intercom friend, and triple

tap with the third intercom friend.

Non-Sena Bluetooth headsets may initiate the Universal

Intercom connection, activating the voice dialing or

using the redialing operation. You may also disconnect

the existing connection by ending a call operation

function (refer to the users’ manual of the headsets for

voice dialing, redialing, and ending a call).

16.3 Three-way Universal Intercom

You may make a three-way Universal Intercom

connection with two SPH10s and one non-Sena

Bluetooth headset. If the intercom connection is

made, all headsets connected cannot use the mobile

phone call function since the connection between the

headset and the phone is disconnected temporarily.

If you disconnect the intercom call, the mobile phone

connection is made again automatically so that you can

use a mobile phone call function. During the intercom

call, you cannot pick up the incoming phone call since

it is disconnected, however, you can pick it up if you

disconnect the intercom call.

1. You (A) need to be paired with non-Sena Bluetooth

headset (B) and another SPH10 headset (C) for the

three-way conference intercom.

(A)

(B) (C)

Pairing