User Guide

10S
19
English
5.3 Advanced Selective Pairing - A2DP Stereo or
Handsfree
When you are using a smartphone, sometimes you may need to
selectively use the 10S for A2DP stereo music only or for mobile phone
handsfree only. These instructions are for advanced users who want to
pair the 10S to their smartphones with only one selective prole: A2DP
for stereo music of HFP for phone calls.
If you have previously paired a mobile phone to the 10S, you must
clear the previous pairing list on both devices: the mobile phone and
the 10S. To clear the pairing list on the 10S, please do a factory reset
or following the pairing list clearing procedure described in
section
17.4, “Factory Reset” or 14.12, “Delete All Bluetooth Pairing
Information” . To clear the pairing list on the mobile phone, please refer
to the mobile phone manual . For most smartphones, delete the Sena
10S from the list of Bluetooth devices in the settings menu.
5.3.1 A2DP Stereo Music Only
1. Turn on the headset and press the Phone Button for 5 seconds
until the LED ashes red and blue alternately and you hear
multiple beeps.
2. Within 2 seconds, tap the Jog Dial again, then the LED ashes red
and you hear “Media selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select the
Sena 10S in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for PIN.
5.3.2 HFP for Phone Call Only
1. Turn on the headset and press the Phone Button for 5 seconds
until the LED ashes red and blue alternately and you hear
multiple beeps.
2. Within 2 seconds, tap the Phone Button again, then the LED
ashes blue and you hear “Phone selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select the
Sena 10S in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for PIN.