User Guide
10S
23
English
3. Tap the Phone Button or the Jog Dial to select a voice menu
among the followings:
(1) Last number redial (4) Speed dial 3
(2) Speed dial 1 (5) Cancel
(3) Speed dial 2
4. After selecting the last number redial menu, you will hear a voice
prompt, “Last number redial”. Then, to redial the last phone call
number, tap the Phone Button or the Jog Dial.
5. To call one of the speed dials, rotate the Jog Dial clockwise or
counter-clockwise to navigate between the menus until you hear
a voice prompt, “Speed dial (#)”. Then, tap the Phone Button or
the Jog Dial.
6. If you want to exit the speed dial immediately, rotate the Jog Dial
until you hear voice prompt, “Cancel”, and tap the Phone Button
or the Jog Dial. If you do not press any button within 15 seconds,
the 10S will exit the voice speed dial menu and go back to stand-
by mode.
Note:
1. Make sure that you connect the mobile phone and the headset to use the
speed dial function.
2. You need to assign speed dial numbers before using the speed dial
(please refer to section
14.1, “Assigning Speed Dial”
).
6.3 GPS Navigation
If you pair a Bluetooth GPS to the 10S as described in
section 5.2,
“Second Mobile Phone Pairing - Second Mobile Phone, GPS, and
SR10”
, you can listen to GPS instructions wirelessly. Rotate the Jog
Dial clockwise or counter-clockwise to adjust volume. The GPS voice
instruction interrupts intercom conversation but it is automatically
reestablished after the GPS voice instruction ends.
6.4 Sena SR10, Two-Way Radio Adapter
You can use a two-way radio and the 10S Bluetooth intercom
simultaneously by using the Sena SR10, a Bluetooth Two-way Radio
Adapter (please refer to
section 5.2, “Second Mobile Phone Pairing -
Second Mobile Phone, GPS, and SR10”
). Incoming audio from the
two-way radio will not interrupt an intercom conversation but is heard
in the background. This is useful when you have an intercom
conversation with a passenger on the back seat and use a two-way
radio for group communication with other motorcycle riders.