User Guide
10S
32
1. If a non-Sena headset does not support a multipoint connection,
it cannot use a phone call connection while using the Universal
Intercom.
2. As for Sena headsets, the Universal Intercom affects the multipoint
connection.
3. If non-Sena headset (already paired as Universal Intercom with
Sena) is turned on, then the multipoint connection is automatically
deactivated. And the non-Sena headset is automatically
connected to Sena headset as a Universal Intercom. So you
cannot use multipoint connection devices such as GPS, while a
non-Sena headset is turned on.
4. Even though you disconnect the non-Sena headset as a Universal
Intercom, it will not automatically restore the multipoint connection.
To restore the multipoint connection, you should turn off the
non-Sena headset rst, then try to connect to multipoint device
manually from the device screen or simply reboot the device so
that it automatically connects to the Sena headset.
11.1 Universal Intercom Pairing
The 10S can be paired with non-Sena Bluetooth headsets for Bluetooth
intercom conversation. You can pair the 10S with only one non-Sena
Bluetooth headset so if you pair with a different non-Sena Bluetooth
headset, the previous pairing will be removed.
1. Turn on the 10S and a non-Sena Bluetooth headset that you want
to pair with.
2. Press the Jog Dial for 10 seconds to enter the conguration menu.
Rotate the Jog Dial until you hear a voice prompt, “Universal
intercom pairing”. Tap the Phone Button to enter into Universal
Intercom Pairing mode and the blue LED will ash rapidly and you
will hear multiple beeps. Please refer to
section 14.14, “Universal
Intercom Pairing”
for more details.
3. Perform the operation required for handsfree pairing on the non-
Sena Bluetooth headset (refer to
the User’s Guide for the headsets
you want to use). The 10S will automatically pair with a non-Sena
Bluetooth headset when each are in pairing mode.