User Guide

10S

English

11.2 Two-way Universal Intercom

You can initiate the Universal Intercom connection with non-Sena

Bluetooth headsets using the same intercom connection method as

you would between other Sena headsets. You may single tap the Jog

Dial to begin an intercom conversation with the rst intercom friend,

double tap with the second intercom friend, and triple tap with the

third intercom friend.

Non-Sena Bluetooth headsets may initiate the Universal Intercom

connection, by activating the voice dialer or using the redialing

operation. You may also disconnect the existing connection by using

the operation to end a call (refer to

the User’s Guide of the headsets

for voice dialer, redialing, and ending a call).

11.3 Three-way Universal Intercom

You may make a three-way Universal Intercom connection with two

10Ss and one non-Sena Bluetooth headset. If the intercom connection

is made, all headsets connected cannot use the mobile phone call

function since the connection between the headset and the phone is

disconnected temporarily. If you disconnect the intercom call, the

mobile phone connection is made again automatically so that you can

use a mobile phone call function.

1. You (A) need to be paired with a non-Sena Bluetooth headset

(B) and another 10S headset (C) for the three-way conference

intercom.

(A)

(B) (C)

Pairing